Quadrate works? Will this work?

[Cody_300ex]

I got bored today and decided to clean up my works tripples. I got the idea of quadrates. So I put the top spring of my left shock on top of the top spring on my right one to make this.....

[CannondaleRider]

I don't know, i'm pretty sure each spring is supposed to be softer then the one below it. So i'm not sure if that would do any good or not.

[ZSK]

I can't see how that would add any performance. The two springs are the same rate and act as a longer spring. Basically you stuffed a longer spring onto the body. All I can see is that it will raise the ride height.

[parkers30]

it should make more of the travel of the shock in softer springs, making the shock softer, probably raise the ride height, since works shocks are not zps

[terko440]

yep depending on the value of the spring you could still have a triple rate that would perform alittle different......or alot

[Cody_300ex]

bump

[250xTrailRider]

What makes you think that you need to do this? Are you bottoming out? As far as looking cool you've got but if this was a hot setup I would think Elka or Works or someone else would be all over it by now. Just my .02$ worth though.

[bwamos]

It'll just make them bottom out easier. ;)

And as said before your still tripple rate.. w/ 4 springs.
Just have more soft spring.. so you'll be squishier, if that's a word.