yfz162
06-07-2005, 11:46 AM
I have a partially assembled mx 250r for sale. I can
email pics upon request. Parts include:
Ct 330 engine kit with fresh topend and zero bores
on the cylinder. The engine kit cost over $1800.00
plus the cost of new 2nd-5th gears. The egine and
parts are a little over a year old. Brand new stator also.
Front end has Burgard +2+1 arms w/Elka tripples
w/rezzies. Comp. preload adjust. Brand new Asr
dual line steelbraided brake lines.
Rear has stock shock revalved by K&K w/Dura Blue
axle and brand new D.Blue fiber hubs. Billet aluminum
carrier w/brand new bearings. Quad doesn't come
with swinger(cracked but repairable). Steel braided
brake line on rear also.
Ac front/rear bumper, Propegs, Chrome shrouds, Maier
race style front and standard rear(yz blue) with Nac's
graphics/seat cover(VGC w/no cracks and few scratches
on rear from boots). Douglas .190's front and rear with
Holeshot mx's front/rear with 50% tread.
Basically all the quad needs is a swinger, wiring harness and
electricals besides the stator. I have brand new swinger
pivot bearings also. I am from central Illinois. I would like
to get $2500.00 plus any shipping costs, but will negotiate.
250r swingers go fairly cheap on ebay or other sites. I
tore it down over the winter with intentions of rebuilding, but
went with the yfz instead. Quad is very fast when together!
I can email pics of parts if interested. Possibly part out if the
bigger parts draw interest. Thanks
email pics upon request. Parts include:
Ct 330 engine kit with fresh topend and zero bores
on the cylinder. The engine kit cost over $1800.00
plus the cost of new 2nd-5th gears. The egine and
parts are a little over a year old. Brand new stator also.
Front end has Burgard +2+1 arms w/Elka tripples
w/rezzies. Comp. preload adjust. Brand new Asr
dual line steelbraided brake lines.
Rear has stock shock revalved by K&K w/Dura Blue
axle and brand new D.Blue fiber hubs. Billet aluminum
carrier w/brand new bearings. Quad doesn't come
with swinger(cracked but repairable). Steel braided
brake line on rear also.
Ac front/rear bumper, Propegs, Chrome shrouds, Maier
race style front and standard rear(yz blue) with Nac's
graphics/seat cover(VGC w/no cracks and few scratches
on rear from boots). Douglas .190's front and rear with
Holeshot mx's front/rear with 50% tread.
Basically all the quad needs is a swinger, wiring harness and
electricals besides the stator. I have brand new swinger
pivot bearings also. I am from central Illinois. I would like
to get $2500.00 plus any shipping costs, but will negotiate.
250r swingers go fairly cheap on ebay or other sites. I
tore it down over the winter with intentions of rebuilding, but
went with the yfz instead. Quad is very fast when together!
I can email pics of parts if interested. Possibly part out if the
bigger parts draw interest. Thanks