PDA

View Full Version : zero pre load Elka's


jiffers
06-06-2005, 03:23 PM
i have done a search on this and read loads but I'm confused how can you tell if these are zero preload?
my front shocks have 3 springs the top one just compresses completely i know it should do that i found that but are they zero pre load

jiff
TBD
06-06-2005, 03:31 PM
If the top spring cancells out right away then it sounds like zero preload.
woodsZrider
06-06-2005, 03:36 PM
one things for sure....
they ARE triple rate......;)
Kurt Glore
06-07-2005, 07:14 AM
Does your bike sag without compressing the shocks? If you are ZPS'd you will be sittin' low.
jiffers
06-07-2005, 12:29 PM
it compress the top spting all the way unless i turn the spacer and it sits low but not sure if it is lower than the standard ones as i brought the bike with them on

jiff
cdalejef
06-07-2005, 12:33 PM
Yes, those are SSD.
400exrider707
06-07-2005, 02:56 PM
Originally posted by kurt440
Does your bike sag without compressing the shocks? If you are ZPS'd you will be sittin' low.

My buddies Z doesn't compress at all without the rider on it and his are ZPS. I guess its probably because they are set up for a 300 lb rider!?:eek2: