'04 YFZ 450 XC Ready - For Sale

[ChuckSpears825]

I'm getting out of racing and looking to sell my quad. $9,000.

Includes:

Houser LT A-Arms, 19.25" Elka Front Shocks, Houser Swingarm w/Round carrier, Houser LT linkage, Elka LT Rear Shock, Hipers with Razr 2's front & rear (21" front & 20" rear), braided brake lines, Houser +1 stem with Houser bottom, Ricky Stator tie rod ends, GPR Stabilizer, TC Pipe (full system), HMF Ballance pipe w/quiet core (slip on), IMS pegs with kick-ups, Arens nerf bars, Graves Motorsports seat cover (1" extra padding), spare seat with slight tear, PEP chair roller relocator, Lonestar Axcalibur Axle, Badger Swing-arm skid plate (w/spare), PRM Summit Bumper, PRM .25 frame skid, Honda thumb throttle w/carb spring mod, Lonestar Battery box, Black Maier Plastic, & all OEM parts that were replace with aftermarket parts.

I do have an oversized IMS tank that I should be receiving soon. I won a gift certificate @ a local race. I'll include the tank too.

I can e-mail pics if interested.

NOT INTERESTED IN PARTING OUT. SELL AS IS.

[ChuckSpears825]

Forgot to mention that I'm located in SW Michigan.

[ilovemymxer]

just wondering if you would be interested in my quad for trade, just looking for something different.

2001 Honda TRX400ex Hybrid
2001 Yamaha YZF426 motor that has just been rebuilt
2001 Honda 400ex frame professionally done
TC custom exhaust full system supertrap
Keihn FCR carb
Uni air filter
Honda 250r radiator

Houser +3 long travel a-arms silvervein powdercoat
Custom axis long travel shocks fully adj. fresh
Lone star swingarm silvervein powdercoat
Custom axis dual rate fully adj. fresh
Lone star +4 axle
Lone star anti fade hub
Lone star twin row bearing carrier
Streamline brake lines front and rear
AC stadium bumper
AC propeg nerfbars
Protaper handlebars
Denton stearing stabilizer, rebuildable
Motion pro clutch and throttle cables
Motion pro easy pull clutch lever and perch
Holeshot MXR4's front and rear 90% tread
10x6 front hyper beadlock wheels
9x9 rear hyper dual beadlock wheels
New OEM front plastic, gas tank cover and side panels
Fiber hood w/ scoop
Pro Design kill switch
Durablue adjustable rear strut
Lonestar swaybar silvervien powdercoat

This bike has been adult owned and has rarely been motocrossed raced but has seen lots of tt and flat track racing. It also has seen a lot of the sand dunes of oklahoma. The frame hasnt been welded on except to put new motor mounts in. This bike has not been out pulled by any 450r and very rarely by a yfz450. Motor oil has been chaged every 5 hours of riding and no more. i am willing to part out if offer is reasonable. Please make me an offer and dont be afraid to offer a trade. Feel free to email me at mxracer22@hotmail.com or call at 316-305-5927. Best offer takes it!!!!![

[rippin2]

trade for dale

[ChuckSpears825]

Sorry guys. I'm not interested in trades.

[ChuckSpears825]

I'll take $8,000..firm. Will drive 100 miles from K'zoo, MI to deliver.

[ChuckSpears825]

Here's a pic.

[ChuckSpears825]

bump

[ChuckSpears825]

OK, I'm ready to part it out. Any interest?

[quadboy1988]

u have a pm

[Quad18star]

How much for the a-arms , swingarm, shocks ( what weight are they for) , possibly stem .

Actually just list the price for all the individual parts you have on it ... I'm interested in a few things .

[ChuckSpears825]

$2,200 for the whole long travel set-up.

Includes:

1. LT A-Arms
2. Tie rods w/Ricky Stator ends.
3. Elka 19.25" front shocks. (Hi Speed & Lo Speed Compression Adj.
4. Houser Swing Arm
5. Houser LT Linkage
6. Elka rear socket (Hi speed & Lo Speed Compression adj.)
7. (2) Badger Skid Plates


Separate Items:

A. Houser +1 Steering Stem (Chrome) $150 (includes Houser Bottom)
B. GPR Stabilizer $200
C. PRM Summit Bumper $25
D. Arens Nerf Bars w/Roll Design Pro Peg w/Kick-up $165
E. TC Racing Pipe $300 (Complete System)
F. Bill Ballance Carbon Fiber Slip-On $150
G. PRM .25 Skid Plate $25
H. PRM Desert Rear Grab Bar $25

[Quad18star]

What weight are the Elkas setup for?? Are the Houser arms +0.50 ?? Can you please get some close up pics of this setup ( a-arms , shocks , swingarm )

What shape is the skid plate in and is it a full skid plate??

I'm very interested . You can post the pics on here , or send them to GregLarocque644@hotmail.com

Thanks .

[ChuckSpears825]

I'll sell the stock quad for $3,500.

[ZSK]

How much for the wheels tires and IMS tank?

[ChuckSpears825]

$600 for the wheels & tires. $100 for the tank (when I get it, you can choose the color too)

[Quad18star]

Pictures of the parts .

[Quad18star]

Bumper and a-arms

[Quad18star]

A-arms and shock

[Quad18star]

Skid Plate .... Waiting for shipping price .. I got first dibs on it . ;)

[Quad18star]

Swingarm skid plate

[Quad18star]

Houser Swingarm .

[ChuckSpears825]

Thanks for posting the pics Greg.:D

[quadboy1988]

u got a pm

[Quad18star]

I'm taking that full body skid plate .