"BLAHH"300!!
05-24-2002, 01:24 PM
ok..ahhh man i'm bout ready to toss this 300 in a ditch....
bahhh...ok here's the deal pickle'
i've told you my swingarm/carrier was messed up and my chain wont stay tight. i though maybe, replace the bearring, maybe it's turning the carrier before it turn's the bearring. i do that. but it doesn't work. so i turn around to head back home.
MY CHAIN BREAKS AGAIN!!! that's three time's in one week.
in differant places. and hassn't broken on the master link yet. now it has 3 master link's on one chain....(i'll replace it after i get all this worked out....)..so i walk home get the big bear. tow my 300 home.. put it up on the rack. start taking stuff apart again..and oil dripps down on the ground...."what's that...oil..from where?"..CRACKED MY CASE!!!!!!....blahhhh
ok here's my question.
the way the case cracked was the chain dug down ino the metal and dug out a groove deep enugh to make a hole in it. the hole is small..it doesn't leak unless the bike is running...not sure exactly how big the hole is..but it's smaller than i can see/notice. but....
can i weld a little bead over this hole and be done with it....run a bead/weld fill the hole. take a grinder..grind it smooth again make sure it's flush and put it all back together.???? or do i absolutly HAVE to buy a new case....?????...like i said man i'm about ready to throw this thing away. if it's not one thing it's another. it's a kool bike....WHEN IT'S PARKED..right here in the prime of summer time too man.....and another thing..if i sold it, i couldn't get enugh to get another bike, and if i parted it out to get more money, well....i don't have any part's to sale.....there all ..FkT up...i can't win for loosing dude...sorry i vented....
would this work?
bahhh...ok here's the deal pickle'
i've told you my swingarm/carrier was messed up and my chain wont stay tight. i though maybe, replace the bearring, maybe it's turning the carrier before it turn's the bearring. i do that. but it doesn't work. so i turn around to head back home.
MY CHAIN BREAKS AGAIN!!! that's three time's in one week.
in differant places. and hassn't broken on the master link yet. now it has 3 master link's on one chain....(i'll replace it after i get all this worked out....)..so i walk home get the big bear. tow my 300 home.. put it up on the rack. start taking stuff apart again..and oil dripps down on the ground...."what's that...oil..from where?"..CRACKED MY CASE!!!!!!....blahhhh
ok here's my question.
the way the case cracked was the chain dug down ino the metal and dug out a groove deep enugh to make a hole in it. the hole is small..it doesn't leak unless the bike is running...not sure exactly how big the hole is..but it's smaller than i can see/notice. but....
can i weld a little bead over this hole and be done with it....run a bead/weld fill the hole. take a grinder..grind it smooth again make sure it's flush and put it all back together.???? or do i absolutly HAVE to buy a new case....?????...like i said man i'm about ready to throw this thing away. if it's not one thing it's another. it's a kool bike....WHEN IT'S PARKED..right here in the prime of summer time too man.....and another thing..if i sold it, i couldn't get enugh to get another bike, and if i parted it out to get more money, well....i don't have any part's to sale.....there all ..FkT up...i can't win for loosing dude...sorry i vented....
would this work?