400ex rear end on 300ex?

[Cody_300ex]

I've been seening pic of 300's with 400ex rear ends on them anybody have any info on this mod?

[300excrazy98]

yes i have looked into this mod repeatidly, is alls you will have to do is weld on a mount for the linkage and that is about it

[Cody_300ex]

Bump

[hardkoratvmxr]

does the linkage month to the frame or what

[Cody_300ex]

Originally posted by Lil_300Ex_Kid
Bump

[Trevor]

too bad it wasn't as easy as the banchie, blaster swap

[Out_Sider]

the swing arm bolts up, but you have to weld 2 tabs on the bottom of the frame for the linkage set up, everything else bolts on

[Cody_300ex]

Sounds like a project to me! :D I've been need a new rear end anyways.

[Out_Sider]

i'll take you thru the process on aim if you do decide to do it, just remember you need swing arm, linkage, shock, carrier, possibly brakes (not quite sure on brakes, idk what they guy had that i rear about do it) and axle all from a 400ex to do this

[pistonbone]

somebody wanna post a couple pics of this setup, specifically the linkage setup?