Quit and won't start?

[hosted]

Today was my first day I was able to hit my steel ramp. I was having a blast until my last jump when I thought I would give it a little more gas before I put it up for the night. I ended up overshooting my landing and slamming into the ground. As soon as I hit the ground my 400ex shut off and won't start back up. We tried to pull start it for about 5 minutes before putting in the shop for the night. I've checked all of the basic stuff like gas and making sure I just didn't have the key off. I'm going to check the plug and stuff in the morning to see if I can figure it out. I don't have a kill switch so that's not a possibility either. If anyone has any ideas of things to check please let me know.

ps. Steel ramps are a blast!!!

[prepracing]

broken ground wire or maybe blown fuse, just a couple things to check

[plkmonster2]

do you have spark? Sounds electrical. You may have cracked the coil, or a wire could have just flopped out.

[hosted]

No, it doesn't have spark. I'm going to check over all of the wiring and look for bad connections and wires. If you have any good ideas of things to check, let me know.