baker250r
05-30-2005, 06:02 PM
Hey everybody, I have a MX 265R for sale. I am asking 3800 for It.
Its a 1988 frame, with a 86 short rod motor in it.
-265cc
-Ported, and polished
-milled cilinder
-200 PSI
-Paul Turner CHrome pipe.
-Fat Boy 2 silencer
-Spare paul turner pipe
-Spare LRD silencer
-Razr's on front, 90% tread
-Grooved Tamers on back - 60% tread
-Douglas Rims
-Ohlins shocks on front (not shown in picture, but are on machine)
-Revalved rear stock shock
-Ace Fabrication Chromoly Swingarm
-Braking Waved rotors on front
-Moose slotted rotor on back
-Steel Braded Brake lines
-AC bumper
-AC grab bar
-DG nerf Bars
-Durablue Axle
-Lonestar Carrier
-Maier plastics
-Dixo Carbon Fiber Hood
-Aluminum Scoops
-TAG travis spader series CR hi bend bars
-Wheel spacers in front
-Foot peg kickups
-Duncan racing graphics Kit, and seat cover
-Frame gussets
-Wiseco piston
-K&N filter
-Hinson Basket
-New clutch this spring
-new clutch cable
-MX gearing 14-38
-Tether
-Powermadd Hand Guards
-Wiseco Hot rod Crank
-Anti Fade Lock Nut
-New wheel bearings in front
-New swing arm bearings
-Stock carb bored out to a 37, or a 38mm. not sure which.
There is more on this machine, but right now I am having a brain fart.
I bought this wheeler last fall in preaty bad shape, and thru the winter I went thru and redid everything, from the frame up. Since the rebuild I ran amsoil in the tranny, and I ran 50/50 mix on race/pump gas, and I used MC1 for blend oil
I did race this once this april, and it was running up in the top 5, when its rider (me) wasnt hurting. so this motor easily competes with the 450's out there, stock , and modified. But sadly, that same day I broke my wrist, and I am out for racing this whole summer, and this fall i start tech school, so I wont have any time to ride her. She needs a loving caring family.
http://www.imagestation.com/picture/sraid164/pbf3deff7c6bfbd0c8b3f5d3e665f5252/f474e3a9.jpg
http://www.imagestation.com/picture/sraid164/p11cf7f1a2d14bfdf2ca6c97a76dd9931/f474e3a8.jpg
http://www.imagestation.com/picture/sraid164/pc465e0736965b000638205c471b0df1a/f474de72.jpg
http://www.imagestation.com/picture/sraid164/pc22e0fec8df099b192a4bf69106bee00/f474de6a.jpg
This is what it looked like when I bought it last fall, So as you can see, there was A TON of work put into her.
http://www.imagestation.com/picture/sraid166/p69c1c2b7a7443169ab39c55a9231cec7/f44a6f15.jpg
Its a 1988 frame, with a 86 short rod motor in it.
-265cc
-Ported, and polished
-milled cilinder
-200 PSI
-Paul Turner CHrome pipe.
-Fat Boy 2 silencer
-Spare paul turner pipe
-Spare LRD silencer
-Razr's on front, 90% tread
-Grooved Tamers on back - 60% tread
-Douglas Rims
-Ohlins shocks on front (not shown in picture, but are on machine)
-Revalved rear stock shock
-Ace Fabrication Chromoly Swingarm
-Braking Waved rotors on front
-Moose slotted rotor on back
-Steel Braded Brake lines
-AC bumper
-AC grab bar
-DG nerf Bars
-Durablue Axle
-Lonestar Carrier
-Maier plastics
-Dixo Carbon Fiber Hood
-Aluminum Scoops
-TAG travis spader series CR hi bend bars
-Wheel spacers in front
-Foot peg kickups
-Duncan racing graphics Kit, and seat cover
-Frame gussets
-Wiseco piston
-K&N filter
-Hinson Basket
-New clutch this spring
-new clutch cable
-MX gearing 14-38
-Tether
-Powermadd Hand Guards
-Wiseco Hot rod Crank
-Anti Fade Lock Nut
-New wheel bearings in front
-New swing arm bearings
-Stock carb bored out to a 37, or a 38mm. not sure which.
There is more on this machine, but right now I am having a brain fart.
I bought this wheeler last fall in preaty bad shape, and thru the winter I went thru and redid everything, from the frame up. Since the rebuild I ran amsoil in the tranny, and I ran 50/50 mix on race/pump gas, and I used MC1 for blend oil
I did race this once this april, and it was running up in the top 5, when its rider (me) wasnt hurting. so this motor easily competes with the 450's out there, stock , and modified. But sadly, that same day I broke my wrist, and I am out for racing this whole summer, and this fall i start tech school, so I wont have any time to ride her. She needs a loving caring family.
http://www.imagestation.com/picture/sraid164/pbf3deff7c6bfbd0c8b3f5d3e665f5252/f474e3a9.jpg
http://www.imagestation.com/picture/sraid164/p11cf7f1a2d14bfdf2ca6c97a76dd9931/f474e3a8.jpg
http://www.imagestation.com/picture/sraid164/pc465e0736965b000638205c471b0df1a/f474de72.jpg
http://www.imagestation.com/picture/sraid164/pc22e0fec8df099b192a4bf69106bee00/f474de6a.jpg
This is what it looked like when I bought it last fall, So as you can see, there was A TON of work put into her.
http://www.imagestation.com/picture/sraid166/p69c1c2b7a7443169ab39c55a9231cec7/f44a6f15.jpg