quadridermx
05-30-2005, 07:01 AM
Picked up a 1990 Banshee in pieces that I'm parting out. This was a great running banshee before the previous owner took it apart and spent all the money on these brand new aftermarket parts only to loose his job before he could get it all back together.
Here's what I have...
1) Trinity Racing Stage IV 2 into 1 complete setup - $275
This is just about BRAND NEW, in excellent shape, and ready to bolt on and go! Includes manifold, carb, carb to manifold boot, thumb throttle w/cable, and reed block w/reeds. The manifold and carb alone are selling for almost $500 on trinity's website.
2) Bills Pipes chrome pipes w/ silencers - $300
Again, pipes are just about BRAND NEW! No rust no dents barely even a scratch... in excellent shape and ready to bolt on. Silencers don't have any name on them but sound great, definitely aftermarket of some kind. Together these would retail for around $600 for the set.
3) Bottom end - $400
Comes with an almost BRAND NEW Wiseco Hot Rod crank and connecting rods. Crank and rods are PERFECT! Transmission is mint, clutch is good, all other gears are in good condition, side covers are perfect and very shiny. May be missing a few odds and ends, but price reflects that. NEEDS TO BE ASSEMBLED! This bottom end is in pieces, but you get everything I have including kick starter. Crank alone retails for over $500, and it's just about brand new. Add $100 for the cases, $75-100 for the transmission, $75 for the clutch assembly, and another $50 for misc parts and this is a squeal of a deal.
4) Cylinders w/head - $225
Fresh .050 bore. I don't have the equipment to verify .050 but they're definitely clean and ready to run. Cylinders are mint, head is good... both ready to go. Fresh black paint on the cylinders and head is very shiny and makes everything look brand new.
5) 1990 Complete Banshee rolling frame - $750
Chassis is just about spotless. It has some kind of tough blue paint on it that looks really good. Everything was coated correctly while the quad was apart and hasn't even been ridden on.
Comes with:
+2 axle
DG alloy nerfs
DG alloy front bumper
Brand new black Maier plastics (older style)
ITP rear rims with spider treks on back and holeshots on front
Renthal bars
Tether kill switch
Ceet seat cover (the classic blue and white tiger stripe!)
Aluminum rear grab bar
250r front shock setup
Also comes with an excellent condition 250r rear shock to replace the stock banshee rear (worth an easy $150 alone!)
Every bearing and bushing in the frame is brand new and perfectly tight. The front shock mounts on the bottom A-arms were relocated to accept 250r front shocks (already installed) which have much more travel and better overall action than banshee stockers.
This would be an AWESOME rolling chassis to slap a streetbike or sled motor in. Or, since it's all still stock... put another banshee motor in and have a very nice banshee for under $1500.
Prices as listed, or will sell the entire project for $1650.
If you need pictures or have questions about anything just let me know! I may also be interested in trading the complete project (everything minus the pistons) for another running quad or bike... let me know what ya got!
PICTURES:
2 into 1 system, DOES come with the slide and cable but it's not pictured
http://www.imagestation.com/picture/sraid171/pb9aa765e52ff1c56fb144978573a5ab0/f3e2a7f1.jpg
Bill's pipes, DOES come with silencers but they're not pictured
http://www.imagestation.com/picture/sraid171/p3e218db9775af93485bbc53af9832a3e/f3e2a80f.jpg
Bottom end with wiseco crank setup
http://www.imagestation.com/picture/sraid171/p3fbcb0b286e4abec20aa60a775858b10/f3e2a807.jpg
Cylinders w/head... these are ported. The guy I bought it from said they absolutely fly.
http://www.imagestation.com/picture/sraid171/p072c8b75933b0dd08a9014522ac409d5/f3e2a815.jpg
http://www.imagestation.com/picture/sraid171/p0bd9e26c37f9250e9942e4d20a03bcc1/f3e2a7fd.jpg
Rolling Chassis... it's just loosely bolted together and there are a lot of parts *not on in the pictures* but I do have everything in separate boxes that's not in the picture.
http://www.imagestation.com/picture/sraid171/p0079ea497cd7d7c55d293f8b7d404672/f3e2a7f6.jpg
http://www.imagestation.com/picture/sraid171/p308eb0ea0048a3f020b908bc60ed4329/f3e2a803.jpg
Here's what I have...
1) Trinity Racing Stage IV 2 into 1 complete setup - $275
This is just about BRAND NEW, in excellent shape, and ready to bolt on and go! Includes manifold, carb, carb to manifold boot, thumb throttle w/cable, and reed block w/reeds. The manifold and carb alone are selling for almost $500 on trinity's website.
2) Bills Pipes chrome pipes w/ silencers - $300
Again, pipes are just about BRAND NEW! No rust no dents barely even a scratch... in excellent shape and ready to bolt on. Silencers don't have any name on them but sound great, definitely aftermarket of some kind. Together these would retail for around $600 for the set.
3) Bottom end - $400
Comes with an almost BRAND NEW Wiseco Hot Rod crank and connecting rods. Crank and rods are PERFECT! Transmission is mint, clutch is good, all other gears are in good condition, side covers are perfect and very shiny. May be missing a few odds and ends, but price reflects that. NEEDS TO BE ASSEMBLED! This bottom end is in pieces, but you get everything I have including kick starter. Crank alone retails for over $500, and it's just about brand new. Add $100 for the cases, $75-100 for the transmission, $75 for the clutch assembly, and another $50 for misc parts and this is a squeal of a deal.
4) Cylinders w/head - $225
Fresh .050 bore. I don't have the equipment to verify .050 but they're definitely clean and ready to run. Cylinders are mint, head is good... both ready to go. Fresh black paint on the cylinders and head is very shiny and makes everything look brand new.
5) 1990 Complete Banshee rolling frame - $750
Chassis is just about spotless. It has some kind of tough blue paint on it that looks really good. Everything was coated correctly while the quad was apart and hasn't even been ridden on.
Comes with:
+2 axle
DG alloy nerfs
DG alloy front bumper
Brand new black Maier plastics (older style)
ITP rear rims with spider treks on back and holeshots on front
Renthal bars
Tether kill switch
Ceet seat cover (the classic blue and white tiger stripe!)
Aluminum rear grab bar
250r front shock setup
Also comes with an excellent condition 250r rear shock to replace the stock banshee rear (worth an easy $150 alone!)
Every bearing and bushing in the frame is brand new and perfectly tight. The front shock mounts on the bottom A-arms were relocated to accept 250r front shocks (already installed) which have much more travel and better overall action than banshee stockers.
This would be an AWESOME rolling chassis to slap a streetbike or sled motor in. Or, since it's all still stock... put another banshee motor in and have a very nice banshee for under $1500.
Prices as listed, or will sell the entire project for $1650.
If you need pictures or have questions about anything just let me know! I may also be interested in trading the complete project (everything minus the pistons) for another running quad or bike... let me know what ya got!
PICTURES:
2 into 1 system, DOES come with the slide and cable but it's not pictured
http://www.imagestation.com/picture/sraid171/pb9aa765e52ff1c56fb144978573a5ab0/f3e2a7f1.jpg
Bill's pipes, DOES come with silencers but they're not pictured
http://www.imagestation.com/picture/sraid171/p3e218db9775af93485bbc53af9832a3e/f3e2a80f.jpg
Bottom end with wiseco crank setup
http://www.imagestation.com/picture/sraid171/p3fbcb0b286e4abec20aa60a775858b10/f3e2a807.jpg
Cylinders w/head... these are ported. The guy I bought it from said they absolutely fly.
http://www.imagestation.com/picture/sraid171/p072c8b75933b0dd08a9014522ac409d5/f3e2a815.jpg
http://www.imagestation.com/picture/sraid171/p0bd9e26c37f9250e9942e4d20a03bcc1/f3e2a7fd.jpg
Rolling Chassis... it's just loosely bolted together and there are a lot of parts *not on in the pictures* but I do have everything in separate boxes that's not in the picture.
http://www.imagestation.com/picture/sraid171/p0079ea497cd7d7c55d293f8b7d404672/f3e2a7f6.jpg
http://www.imagestation.com/picture/sraid171/p308eb0ea0048a3f020b908bc60ed4329/f3e2a803.jpg