Works shocks problem/question?

[ex kid]

I bought a set of used Works shocks for my Blaster, the fronts are AT Steelers with res. and the rear is a Quadstar with a res.

when I pick the quad up by the grab bar and look at the bottem eye of the rear shock there is play in the eye of the shock where the bolt goes through. I am using the stock bolt and i replaced the nylon bearing in the bottom of the shock. my two front shocks have the same play in them, and I replaced the nylon bearing in them as well. my question is, is the play normal? and am i missing a bushing or bolt or sometthing to prevent the play?

THANKS

[hardkoratvmxr]

you are probably missing a spacer

[ex kid]

do the shock experts have any opinions?

[ex kid]

anybody?

[duke416ex]

I had that problem on my works, your eyelets may be wore out. I called them and they recommended a newer style eyelet with poly bushings. I think it was like 30 bucks to replace it all. Just take the bottum loose and see if the eyelt is tear shaped if so you need new ones. Not hard to install just screw on the shaft.