LSR twin row bearing carrier

[Nick110]

can u put an LSR twin row bearing carrier in a stock swing arm.

[ethanp87]

yup.

[Nick110]

r u sure cause i dont see a spot for the grease zerk to fit in

[Chino]

Originally posted by Nick110
r u sure cause i dont see a spot for the grease zerk to fit in

yes it fits, the grease zerk will not be in the way, you still have to take ur carrier out to get to the grease zerk on a lsr carrier, RAD carriers are the only one's i know of, off the top of my head that have a grease zerk on the outside of them that is accessible at all times...

[Nick110]

looks like this

[Chino]

Originally posted by Nick110
looks like this

yeah, i have the same carrier in my 400 the grease zerk will be ENCLOSED in the swingarm and you have to remove the carrier to grease it. Everything WILL FIT no worries.

[Nick110]

ok thanks a lot everyone

[bigbadbrad]

you can allways drill a hole big enough to fit the end of greese gun and use a pipe plug with some teflon dope to seal the hole off. I had a burguard carrier and the bearings key go and the sprocket hub ate up the alluminum where the seal seats so i ordered a srp one and it has the zerk on the outside as well, i cant wait to get it in i ordered a g-force axle also

[Striker49]

What they said. :p

I love mine and its held up great. Ive heard some bad things on the RAD carriers. Its not hard to remove the carrier anyways and its not like you have to grease it every time you change yer oil. I think youll be happy with yer purchase. :)