Front Sprocket Installation Question...?

[JhallettEX]

I took off my front sprocket last night to get the engine area all nice and clean. The problem now is that the front sprocket is loose since I put it back on. It can now wiggle around slightly, I didnt think it did this before. Anyways I also ran into another problem, my dam stock case saver will not line up with the hole so I can't put this on. Am I missing something here? Thanks for the help

[Leo]

both my stock 15 tooth, and Renthal 14 tooth front sprockets have a slight amount of play on the countershaft.. it's been like that since it was brand new..

as far as your case saver goes ? don't know.. It should fit even if you somehow managed to get the sprocket on backwards (stock sprockets are stamped "outside" or something to that effect)..

Leo

i havent rode with a case saver in like a year.
the only problem is that i would crack the case if my chain ever broke. its ok that the front sprocket wobbles a little, mine did too when i put a bigger size on. just try it tighten it more

how much is a renthal 14 tooth sprocket and where can you get them?

Are they in Rocky mountain atv,

or can you get them at your local honda shop?

Originally posted by 400exj
how much is a renthal 14 tooth sprocket and where can you get them?



I got just a generic 14 tooth sprocket for mine from rocky mountain atv for like $7.