PDA

View Full Version : jetting for a predator



dtzalba450r
05-26-2005, 09:59 PM
My neighbor got a yoshi slip on for his predator and I want to make sure that the bike is jetted right. When I put his knn in I rejetted to a 155 and left everything else stock. We are at 2700 feet and the temp is 100s. The main jet is a 155, pilot is stock and the air screw is stock. What should I do? thanks, daniel

the predator
05-27-2005, 05:35 AM
i would actually jump it up to a 165...then work down from there!! air screw 2 3/4 turns out and needle on the 3rd clip..i think that's where it comes from the factory...have fun!

polaris bob
05-27-2005, 09:56 AM
Originally posted by dtzalba450r
My neighbor got a yoshi slip on for his predator and I want to make sure that the bike is jetted right. When I put his knn in I rejetted to a 155 and left everything else stock. We are at 2700 feet and the temp is 100s. The main jet is a 155, pilot is stock and the air screw is stock. What should I do? thanks, daniel

How is it running with this set up???

04EXdude
05-27-2005, 04:20 PM
When we installed an HMF s/o on my buddies Predators with drop in K&N filters we just changed the main jet to a 155 and they run great.

the predator
05-28-2005, 06:35 AM
i didn't know the k&n was a drop in your should be right on spot or really close now

04predyoshi
03-28-2007, 09:24 PM
I bought a jet kit and i am 300 feet and below so i ran a 150 and 2nd on clip and 3 out on air screw and now it is really doggy. But if i put air screw on 2 out it has al sorts of power but gets hot but the light dont come on tho so i think ill go up a jet.