Jetting for Rossier?

[RacinMason_690]

I was wondering what you guys are running for jetting with the Rossier Engineering short pipe? I am at about 1300-1500 feet for elevation, and I wont be running an airbox lid. Thanks, Mason

[TRXDresh]

what type of fuel are you running?

[RacinMason_690]

Amoco 93 octane

[TRXDresh]

HRC kit installed?

[RacinMason_690]

nope, its bone stock

[TRXDresh]

Try a 175 main jet with the clip in the 3rd position. I think that is where the clip is with stock settings.

[Mobile Dyno]

Try a 175 main jet with the clip in the 3rd position

What TRXDresh said. Maybe even try a 170 at that altitude

[LAZARO]

I HAVE A YOSHI FULL PIPE WITH A K&N FILTER WITH AN UM ALUM AIR BOX WITH THE UM ALUM LID.I ALSO HAVE A REV BOX....I JUST BOUGHT A FMF JET KIT N I WOULD LIKE TO KNOW HOW TO SET MY JETTING TO GET MAX PERFORMANCE....IM AT SEA LEVEL.....RIGHT NOW IM AT A 175 MAIN JET N MY BIKES SOUNDS FUNNY WHEN ITS ON CHOKE N DIES ON ME WHEN I TAKE IT OFF CHOKE....CAN ANYONE HELP ME...........

[RacinMason_690]

ok, i put in a 175 and it runs awsome. i was wondering if it is normal for the header to turn purple after riding it some? also, i was wondering what jet to put in with the airbox lid on so that it doesnt void my warranty when i bring it in to the shop for the tune up? thanks, mason