Tires for 300EX

[Kels300]

I am thinking about getting rid of the stock balloon tires and my brother thinks I should get the Maxxis Razr tires.

Do any of you run these or have any other opinions on different tires?

Thanks!:D

[redryder300]

I'm running 23" 6 ply Razr's on the front and 20" 6 ply on the rear.
I've had them on for about 4 months and they have held up well. No flats, excellent traction and they clean mud pretty well too. Just keep em off of the pavement.
I highly recommend them.

[Red Rooster]

I love mine, but listen to redryder and STAY away from the pavement.

[NJ300ex]

I have them on my 400. I like them alot. No flats and i went through some really rocky stuff. I recomend getting 6 ply and for the 300ex 22 in front and 20 inch in the rear. If you need more clearance get 23 inch in front and 22 in rear.

[R-Crazy]

what they all said.

dave

[Kels300]

You would go with the 22" in the front too. Isn't that what stock was? I was thinkin of getting 21x7-10 for the front and 20x11-9 for the rear.

So I should go with the 6 ply? What's the big difference between the two? (And don't tell me 2ply);)

[NJ300ex]

I said 22 just because I like more clearance in front and I don't think the difference in hieght really effects it that much. Go with 21 if you want.

6 ply is better because it is more durabe and resistant to punctures. It has a thicker sidewall and you are less prone to getting "snake bites". I don't really think it wieghs much more than 4 ply either.