Who makes an aftermarket clutch lever/perch that keeps the existing wiring?

[huffdaddy_400EX]

I saw somewhere that there is a company that makes aftermarket clutch levers from the 400EX that supports the existing wiring, does anyone know how they are?

I thought I saw a thread someone on here but I can't find it.

[spazzy973]

all you have to do is cut the two little wires and twist them together and then maybe put a little tape over them that is unless you just want the stock stuff the plug in

[HiZ]

I have a stock wiring harness for sale if you need one.
I do not know of a company that makes an aftermarket kit

[spazzy973]

all you have to do is cut the two little wires and twist them together and then maybe put a little tape over them that is unless you just want the stock stuff the plug in

[Cody_300ex]

Yea, that is just there so you dont try to start the quad in gear w/o the clutch pulled in.

[huffdaddy_400EX]

I soldered the wires together and heat wrapped them...starts fine....lights works...but now my neutral light is not working....is that normal?

[400exstud]

It is actually pretty cool when you sotter the two wires together because now I can start my quad in 1st grear without pullin the clutch in. I still want to see if it will work with the throttle 1/2 or wide open.

[Striker49]

My Wirtz perch has the two grounding bolts on it but I never bothered to hook em up.

The wires just prevent you from starting in gear, nothing really major.