Fuchs42
05-22-2005, 06:42 PM
http://img255.echo.cx/img255/7526/quad0067mq.jpg
http://img255.echo.cx/img255/1484/quad0034qs.jpg
http://img255.echo.cx/img255/5894/quad0014ku.jpg
http://img255.echo.cx/img255/1710/quad0027ej.jpg
Hi guys, Haven't posted in a while on here... Just decided to get back on today and see if I could post my quad up and sell it so I can go buy a 450r.
It's a 2001 300ex, I am the original owner, Bought it new in the begining of 2001.
It's got douglas .190s in the rear, with Kenda Klaw 18s (80% tread)
It needs new front tires, they are pretty bald.
It has DG Alloy nerf bars, with red netting.
It has a FMF Megamax full system, discs included.
It has an LSR Bearing Carrier, greased every couple months.
It has Moose Fat bars with the adapter riser.
It has a new battery as of April.
It has new tie-rods and tie-rod ends at the same time the clutch was done.
It has a brand new clutch and springs with about 5hrs of ride time on them.
It was rebuilt the begining of last summer, bored .20 over and Wiseco 11:1 compression piston.
It has a 14tooth front sprocket, newer chain and sprockets.
It has a fresh set of rear brake pads.
Seat has a few tears, gas tank has a slow leak like all the metal 300ex tanks do, the nuetral and reverse light on the top of the plastic for the headlight don't work, can't figure out why
The oil drain plug will also need to be retapped, I have a rubber boat plug in there now that works fine and doesn't leak, but if you want a bolt you will need to tap the case.
with everything listed, I am asking $1900 Or make me an offer.
I will get pics later today when I get home.
Thanks
http://img255.echo.cx/img255/1484/quad0034qs.jpg
http://img255.echo.cx/img255/5894/quad0014ku.jpg
http://img255.echo.cx/img255/1710/quad0027ej.jpg
Hi guys, Haven't posted in a while on here... Just decided to get back on today and see if I could post my quad up and sell it so I can go buy a 450r.
It's a 2001 300ex, I am the original owner, Bought it new in the begining of 2001.
It's got douglas .190s in the rear, with Kenda Klaw 18s (80% tread)
It needs new front tires, they are pretty bald.
It has DG Alloy nerf bars, with red netting.
It has a FMF Megamax full system, discs included.
It has an LSR Bearing Carrier, greased every couple months.
It has Moose Fat bars with the adapter riser.
It has a new battery as of April.
It has new tie-rods and tie-rod ends at the same time the clutch was done.
It has a brand new clutch and springs with about 5hrs of ride time on them.
It was rebuilt the begining of last summer, bored .20 over and Wiseco 11:1 compression piston.
It has a 14tooth front sprocket, newer chain and sprockets.
It has a fresh set of rear brake pads.
Seat has a few tears, gas tank has a slow leak like all the metal 300ex tanks do, the nuetral and reverse light on the top of the plastic for the headlight don't work, can't figure out why
The oil drain plug will also need to be retapped, I have a rubber boat plug in there now that works fine and doesn't leak, but if you want a bolt you will need to tap the case.
with everything listed, I am asking $1900 Or make me an offer.
I will get pics later today when I get home.
Thanks