Rev limiter/jetting???

[kineo3]

How can I tell if I am hitting the rev limiter or if my jetting is just off. I put on a full yoshi pipe and i have a stutter between 3/4 and full throttle in every gear.

[MR.BIG]

Did you rejet it when you put the pipe on? My rev limiter will kick on when I am wide open only so I doubt it is your rev limiter. You could be running lean.What else do you have done to it? (open air box etc.) What main jet are you running?

[Jersey450R]

something about yoshi pipes make all bikes studder. at least with my few experiences. A buddy of mine has been trying to jet his for 8 weeks and still no luck.

[Blown 331]

Mine runs great with the Yosh TRS. It's a touch faster than my buddys Curtis Sparks, he has a K&N too and I have a stock filter. I didn't touch my getting other than the HRC kit.

[kineo3]

I am running the full hrc kit, with the exception of the yoshi pipe instead of the hrc end cap. I have put a bigger main jet and smaller main jet in with no success. I currently have the 185 main jet.

[brandonpeake]

go to a 50 or a 52 pilot and it helped mine alot with starting and it had a sputter and it cleared it up, 185 is about right on the main but for instance i ru na 195 with my rossier and had to go to a 175 with my LRD pipe so i dont know about the yoshi, on an hmf i used a 178 i believe