help with choosing exhaust!!

[whiteknuckle]

i need to know what kind of slip-on to get? i was goint to get the wb pro-meg but i think my shop quoted me the wrong price! they said around 260 and in the online catalog its closer to 500 and some! anyone know thw promeg price for sure??? i want to spend around 200 to 250 dollars! (i get a 20% discount at my local store" so a 300 dollar pipe only costs me 240! anyway some help would be appreciated! i may get the 416 down the road away's!

[whiteknuckle]

come on guys all these views and no one has an idea about pipes???? i need some info here! there have been lots of posts about this but none that really awnsered my questions! i dont want to lose low end i just want a good pipe that will increase all the way through the power range! and i may get a 416 or 440 in a year or so! help???????

Get a HMF,,I've read alot of good things about them and the price looks sweet too.

[barbwire44]

Ya, I will go along with that the HMF is definately a great pipe for the money. My titanium4 isn't any better and was twice the price!

[Kadafiy]

The HMF will be much cheaper. It really increases the low to mid range but doesn't do a whole lot for the top end. It's the perfect pipe for trail riders, best mod i bought.

[whiteknuckle]

thanks guys im gonna go check one out! i know ya cant gain top end, cause of the gearing but ive heard of pipes that helped through the mid range but lost some on the bottom! thanks im gonna go check this thing out! also is this hmf a good pipe to have when i bore out my motor??? i figure it is or you guys wouldnt have mentioned it! thanks again

[mopar 400]

The hmf is the best pipe out for the money. I would have to say that it would work great with the 416. You could get the slip on for about 200, then grind the welds out of hte stock headpipe to gain a little more "free" power.

[Kadafiy]

I went to HMF and got my slip-on plus 4 airbox vents for $80!!!:D

All I've got to say is BIG GUN.:macho

All I've got to say is BIG GUN.

All I can say is $80.00 WOW is that a real price?

[zuLi0]

Would grinding the welds on a stock motor and stock pipe hurt it or make it better? Really only mod is aftermarket air filter for now, Many mods comming in about a month and a half when it gets rebuilt tottaly well for most part :D But I wanna grind the welds and motor and exhaust is still stock, holla back :\

griding the welds will open the dia of the pipe allowing the exhaust to flow more reducing the back pressure.

This should do a couple things, increase power some, move the power slightly up in the rpm range and slightly reduce the low end torque, but the seat of the pants feel will vary from quad to quad.

[Kadafiy]

Yeah I really got it for $80 otd!!! Don't think I'll ever see a deal like that again. They retail for like 189.00 I think, that's not his usual price.

[400exRacerX]

LRD

My White Bros with a head pipe has more HP than a Big Gun Full system

[4punksdad]

I have a modified stock pipe you can buy from me cheap........if you just want to hear more noise and PO your neighbors :o