IMS Pegs

[ChuckSpears825]

IMS make pegs that are an inch lower than normal. The downside is that I haven't seen nerf bars that will work with the pegs.

[Bunkerking217]

The AC's should, if not, I'd call IMS.

[1iviper]

i think they are only a half or 3/4" down and back but i'm not sure.ac's work no problem.the pegs are nice,like having platforms to stand on.also notice the last part of the peg is staggered so your boot heel kinda locks into it.and if you like to throw it around definatly get the kick ups.
http://img.photobucket.com/albums/v619/1iviper/roll-master.jpg

[woodside83]

i have them they will boult up to just abount any nurfs out there that are not pro pegs

[ChuckSpears825]

Viper, the pegs you have are the standard IMS Pegs. IMS has a set the sits 1" lower than the standard. That's where there's a problem with the nerfs.

[jr1975atv]

No problem with them and the ac nerfs mine bolted up fine i9 used longer bolts and kept the stock heel guards looks ok.