250r parting out LOTS OF AFTERMARKET

[rs500r]

this lonestar and roll design stuff is like new,the front a-arms have a couple of chips but the swinger has basically none. a-arms come with tie rods and ball joints. this stuff was brand new last fall, it has about 25 hrs on it.roll design +1 steering stem with anti vibe clamp and lonestar stem clamp 250.00, over 400.00 new. lonestar +2,+1 a-arms 375.00. lonestar swinger -1 with carrier and chain guide 400.00, nac's billet front hubs, bought used but polished very nice, come with wave rotors in good condition, these are not galfer rotors. 200.00 maier red shiny plastic with a k&k flame sticker kit looks killer and have the seat with cover to go along with plastic, seat has alittle tear at the front top corner where it meets the tank, no burn from my pipe either, for some reason the way this pipe mounts it don't burn the plastic. 350.00 have a dual rate elka rear 650.00 shipped. 200lb. rider for mx. i also have tanks, air box, radiator, front brakes, stadium front bumper, baja rear, overflow bottle, rear stainless brake line -1, lonestar rear hubs. curtis sparks silencer, etc............... my pc is moving slow especially during the week so please call it,s to hard to reply, i don't have a digital cam either. stisfaction guaranteed. since everybody needs pictures to get their rox off. i'll probably be listing his stuff on ebay with nice pics so ican get what i wanted or more. all pics do is let you know i have that part, they don't show condition of parts. especially with all the used car salesman we have out there. you know like armor alling their stuff and wetting parts, not describing worth a crap. . randy 515-306-4283,

[rs500r]

na'cs hubs 200.00

[Dave83]

Nacs kicker,88 spindles,rear caliper-how much for all this together?

[rs500r]

100 for caliper 50 for spindles an 25 for kicker. just checked my brakepad bolts to make sure they will come out. loosened up very easy. lookes wise i give it a 8 of 10. it has almost brand new pads. i've been ripped off on ebay about 3 times on rear calipers. it's in exellent working condition. the kicker i would rate 6 or 7 out of ten.

[Dave83]

How would I pay you?

[Dave83]

i forgot to ask,what color are the a arms?

[rh250r]

please send me picture of swing arm.
rh1077@att.net

[87250rxrider]

how much for rear brake master cylinder, and front stainless brake lines? also, what year length is the rear brake line?
thanks,
-Ryan

[rs500r]

i can't get ya a pic of swingarm right now or any pics. but it's practically new i don't even think there is chips on it. it's got single pinch bolts on each side. it's a 10 of 10 though. it's -1 so its 89 geometry.

[rs500r]

rear master would be 40.00 with rezzy and lines, stainless lines all 3 for 50.00. rear is -1 which would be 89.

[LT250Racer609]

im interested in the frame....can u send me pics to lt250racer609@netscape.net and whats the bottom dollar for the frame including shipping??

[rs500r]

i can't get ya pic right now. it,s silver vein, it's looks gray with the vein look,they call it silver vein. it just has alittle rub through on the shifter side and very tiny spot on brake side where the boots rub. other than that it's sweet. the top shock mount holes are alittle oblong but my shocks never had any movement in them. 300.00 shipped.

[rs500r]

sorry that's 400.00 shipped. for the frame

[rs500r]

bump

[stever250r]

How much for the wave rotors shipped??

[250R-Dee]

What's the setting on the shocks? (rider weight/riding type)

Would you be willing to see the rear shock by itself? How much for the radiator shrouds?

Payment options: Paypal or money order?

[rh250r]

Originally posted by rs500r
i can't get ya a pic of swingarm right now or any pics. but it's practically new i don't even think there is chips on it. it's got single pinch bolts on each side. it's a 10 of 10 though. it's -1 so its 89 geometry.

When can you get pics? Its 89 geometry for 86 and 87 (just making sure)? Is it powder coated or chrome? Will you sell with out the carrier?

[rs500r]

yes its -1 for 86,87 its dark silver vein. it was put on last fall when i put the bike together. it was brand new. pics i'm just not sure i can get ya one. but i would refund your money if not satisfied. i'll think about a price without carrier. it has the nice chain guide too. you can call too. 515-306-4283 randy

[rh250r]

I would like to see a picture before I buy it, but let me know how much you want without the carrier. How old is the swingarm and what brand chain slide does it have?

[robyone]

could you send a pic and a price of the rear hubs to rojenrollison@adelphia.net ...thanks

[swamprider7]

pm'ed you about brake lines

[330EXman]

hey i want the radiator very bad in bad need of one fast so give me a good price that i like and a quick pics and the money will be on the way

i aint looking to spend an arm and a leg though but if reasonble i will ship out money asap where you from?

please send pic to m13jason13@aol.com thank you

also interestin the frame and carb and what you selling for a pipe?

thanks again

[rs500r]

i can't get ya any pics. i bought the radiator used it works fine with no leaks. 30.00 shipped. pipe is a custom made bear metal finish it has a small dent from water pump cover, it's like a lrd,it splits like the lrd, its a all around pipe nice sparks silencer 80.00 for both. 38 air stryker close to new. 130.00.please call me ifyou can 515-306-4283 randy. my pc is very slow

[87250rxrider]

if i can get pics sent to: a250rrider38@yahoo.com on the rear master cylinder, etc, and the front brake lines, which i asked you for the price before. i'll probably take them, i just need to see the pics.
thanks,
-Ryan

[rs500r]

ryan if your serious call me at 515-306-4283 randy

[Dave83]

Randy,I sent the money priority mail for the caliper and spindles.Thanks.

[baseballplaya23]

how much for the aluminum shrouds? what condition are they in? price shipped to 98033

[87250rxrider]

randy... if you have AIM(aol instant messanger), than you can instant message me at any time on my screen name, which is: RSK150 if you do not have an AIM, than let me know and i'll call you when i'm free.
thanks,
-Ryan

[rs500r]

shrouds are in very good condition with middle deflector too..40.00 shipped. randy strait 609 e. diehl des moines,iowa 50315.

[rs500r]

just got it apart today dave. havn't got the spindles separated from ball joints. are ya sure you don't want the a-arms.

[250R-Dee]

I guess you missed my questions at the top of the page so here's a copy and paste job.

What's the setting on the shocks? (rider weight/riding type)

Would you be willing to see the rear shock by itself? How much for the radiator shrouds?

Payment options: Paypal or money order?

[rs500r]

1250 shipped for all 3, or 725.00 for rear. set for 200lbs. mx. please call don't reply 515-306-4283 randy

[Pro1200]

Randy,

PMed you about the exhaust pipe, shrouds, and kicker.

[rs500r]

if you want to talk. you will have to call. 515-306-4283 randy

[rs500r]

bump

[rh250r]

Never got reply on the swing arm? How much with out carrier?

[87250rxrider]

free bump.. everyone who is replying, i just talked to Randy over the phone, and he said that his computer is real slow, which is why he said to call him. if he doesn't reply, its b/c of his comp, so do him a favor and call him. he's a real nice guy, so if you interested in his parts, call him up to ask questions about them.

[rs500r]

bump

[rs500r]

bump

[250R-Dee]

Thanks for the reply. I think I'll go with a new one since I can get it for $800. Good luck with the sale.

Free bump.

[rs500r]

if your going to spend that much on one then why not spend 1200.00 on 3.

[FBRacing76]

interested in front brake lines if they'll work on a 400ex. I am also defanately interested in the Rear wave rotor. Let me know a price on both! Thanks

[87250rxrider]

Randy, when you get a chance, let me know if the other guy took the front lines, or if they are still available. if you haven't sold them yet, then i'll take them, along with the rear master cylinder, with ressy and line. if you don't have the front lines, than i'll just take the rear master, etc...
thanks,
-Ryan

[250R-Dee]

I already have 2 brand Elka SSD's on the front of my Quad so I am only looking for a rear shock.

[rs500r]

bump

[250r rider 88]

how much for the front shocks only?

[fastexgirl4c]

Do you by any chance have an axle?

[rs500r]

front shocks sold. i have a axcaliber that was on the r, i came up alittle short on a double and very slightly bent it. so i'm going to send to lonestar. i was riding with it and it didn't cause me any problems.

[rh250r]

you still got the lone star rear hubs. How much you want for them?

[APK400exRacer]

you have an axle?

[rs500r]

rear micro lite rear hubs. might ne ed to buy a couple studs but the hubs are in top notch condition. 100.00 shipped.

[rs500r]

my axcaliber i took off this bike was slightly bent, not enough that i couldn't ride with it. i just found the warranty card and will send it in, but it will be for sale.

[APK400exRacer]

No thanks, not looking for a durabend :macho

[Blaster x]

what parts are there left?

[rs500r]

i changed the thread so go back and check it out. there is alot more than is listed .

[walsh250r]

DO U HAVE SHOCKS FOR THE A-ARMS OR DO U EVEN HAVE ANY THING ANY MORE? LET ME KNOW I WOULD LIKE TO GET THE A-ARMS AND SHOCKS IF U HAVE THEM THANKS..

[250R-Dee]

Randy - I'll take the rear shock off of your hands. Send me a PM with your payment information.