View Full Version : handle bars
gwroregon
05-10-2005, 07:44 PM
ANY IDEAS FOR A GOOD AFTERMARKET HANDLE BARS. I BENT MY STOCK ONES THIS LAST WEEKENK JUMPING. ARE THE AFTERMARKET BARS LIGHTER AND STRONGER THAN THE STOCK? WHAT IS A GOOD PRICE?
Punk'd
05-10-2005, 07:56 PM
Im in the same situation as you im going to be buying some bars soon. I was thinking Tag or Renthal
KEVIN132
05-10-2005, 08:09 PM
i here a lot of people have tag2 raises bars 3/4" . i dont want to move my key and temp light thhough? if you remove key i here some peopl loose fan. whats up with that? my bars ar fine now but ive been landin ok!!!
i wont even waste my time reading what you have typed.
Seven sixteenths of one inch:
http://maddox.xmission.com/keyboard4.jpg
Originally posted by KEVIN132
i here a lot of people have tag2 raises bars 3/4" . i dont want to move my key and temp light thhough? if you remove key i here some peopl loose fan. whats up with that? my bars ar fine now but ive been landin ok!!!
yes it raises the bars 7/8'' not 3/4, and you will move your key and temp light, i put my key on the side of my bike, and put the temp light on my throttle cable line, you wont lose your fan
450RGNCC
05-10-2005, 08:58 PM
I also put the key on the side of the bike. I positioned it on the left side directly in front of where the tank ends, and it does not get in my way. For the temp gauge, I made a custom aluminum bracket that positions it right in front of the handlebar pad, it works really good.
450RGNCC
05-10-2005, 08:59 PM
Woops, by temp gauge i meant temp light.
300extreme#8
05-12-2005, 02:15 PM
i'm 6" and i run the moose atv version,and thats all i could get at teh time and now i love them,i figured i wouldn't b/c they r taller then most but it allows me to sit down in turns better,and i feel alittle more in control than my cr high renthals,and u save urself better when u come close to wrecking,(not that i do that much or anything:confused: )hahaha they were only 20 dollars also,so it's worth a try,u can get them anywhere.
blake_mx_racer
05-12-2005, 02:38 PM
I am going to go with TAG 2's. I bent my set of moose handlebars. Renthals are good to IMO but i dont want that round cross bad pad with the metal shaft going through it so i am going to get just the square cross bar pad.
Blake
Quadkid4105
05-12-2005, 08:14 PM
i got flexxbars and they are great if you got the $$$. i took my temp light and key off and it is fine.
kbass24emtp
05-12-2005, 08:59 PM
TrailTech have some good bars also. You can get the risers and bars for like a $119 bucks. If you get the set it comes with a plastic cover that relocates the key and light.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.