PDA

View Full Version : 300ex teather kill problems



ethanp87
05-09-2005, 03:03 PM
i have bought a teather kill swith and everytime it is pulled it fries the fuse. how are you hooking it up to stop it. it says will not work with a battery operated ignition.

reconmaster
05-09-2005, 03:52 PM
you'll have 2 by a relay switch that makes it run properly so you don't fry electricals

watts16
05-09-2005, 06:49 PM
Originally posted by reconmaster
you'll have 2 by a relay switch that makes it run properly so you don't fry electricals

yep thats what you have to do

same thing happened to me

ethanp87
05-09-2005, 07:38 PM
Originally posted by exracer16
yep thats what you have to do

same thing happened to me

what kind are you running?

ethanp87
05-09-2005, 07:54 PM
i forgot to ask how would you wire a relay switch and what is the porpose.

300ex73
05-10-2005, 07:48 AM
Haven't had any problems with mine blowing fuses. Basically, you have to run one wire to a frame ground, then the other wire to the black wire that comes out of the coil. It'll have a yellow stripe on it.

red rider88
05-10-2005, 03:55 PM
do they come with a kick start? if so then do it the old fashioned way u lazy people

ethanp87
05-10-2005, 06:00 PM
i have a gunnar kill switch and a pro design and bolth fry the fuses do i hook the pro design to a black and yellow or black and gray

300ex73
05-11-2005, 05:27 PM
If you hook it to the Black and Yellow-striped wire that comes out of the coil, then you should not be blowing fuses. Make sure that when you have it hooked onto there, that you have the other wire connected to a good, solid ground on the frame. I blew a couple fuses trying to hook mine up. But then I found out I was doing it wrong. Make sure you have it connected to the lead coming out of the coil, the one that's mounted on your framerail right in front of your motor.

burkebrothers
05-16-2005, 07:30 PM
if its a pro-design run the ground to the coil and the hot wire to the pulse trigger wire coming from the stator(I think its the blue/yellow one), like the directions say, do not cut in to your coil wires

ethanp87
05-16-2005, 07:37 PM
i figured out how to do it

thanks anyway.