Race cut front fenders

[jt29]

I have been searching around for a race cut front fender that retains the stock head lights. Does anybody make them and were can I find them??

[bonified5]

ure best bet is to probly just cut them yourself if u have a steady hand

[4o0eX RaCeR]

I cut my race fenders myself. Make a templet of what you want it to look like and use black electrical tape to tape of the line you want to cut. i used a pair of tin snips and sanded the edges even. If you do it right it will come out looking like a set of aftermarkets. Good luck

[prepracing]

I agree with cutting them yourself, but maier plastic does make race cut fronts that have the headlight housing for about $230

[Oldracer#23]

If you have a dremel tool, use it. I have cut several fenders using dremel cutting disc. Once they are cut, use very fine sandpaper to smooth the surface.

[Houser440]

:cool:

[awsomeaussies]

If your looking for maiers, you have to buy the full fenders with the headlight cutout, and then cut the fenders off:blah: Not hard at all.