400exrider707
05-04-2005, 10:46 PM
Ok my buddy is in need of an HRC needle. First off do they even sell this needle separate from the rest of the kit? If so does anyone have a part number. The schematics at our dealership show only one needle for the 450R. The schematics for the CRF show about 7 different needles. Second does anyone know if a CRF needle will work in the TRX carb? If so could someone point us in the direction of which needle we would need. We are trying to richen up all around or at least richen up more towards the bottom end, so a thinner needle, or one that is at least thinner on the bottom. Currently we have it on the bottom clip, but it still was too lean. We have dynojet needle spacers to put in it, but its almost too much, the screws that hold the arm on which keep the needle in place keep coming loose, but when you tighten them too much the slide sticks. So we definitely need the needle. I know sparks has a needle as well but is that just the CRF needle, or do they sell just the needle, cause he said he only saw the entire sparks jetting kit. We are only needing the needle. Thanks for the help guys.