countypark
05-03-2005, 03:40 PM
Bradley,
What is your ride height set at? I have my rear set at 8" at the footpegs and 8 1/4 at 22 inches in front of the pegs. 22 inches is where the frame is still flat just behind the a-arms.
If you are getting to much roll you might want to lower the height. Just make sure the front is 1/4 inch more then the rear. Measure the height with you on the quad standing on the pegs in ride position.
To raise the height tighten up the pre-load, to lower it loosen the preload.
The compression setting shouldn't affect the roll.
What is your ride height set at? I have my rear set at 8" at the footpegs and 8 1/4 at 22 inches in front of the pegs. 22 inches is where the frame is still flat just behind the a-arms.
If you are getting to much roll you might want to lower the height. Just make sure the front is 1/4 inch more then the rear. Measure the height with you on the quad standing on the pegs in ride position.
To raise the height tighten up the pre-load, to lower it loosen the preload.
The compression setting shouldn't affect the roll.