Need Help Asap

[Honda400exrox]

i dropped my bike in mud tonite, the throttle side went in the mud, and now my throttle grip slips, so when i give it gas it just slips all the way aroud, i washed the bike, but here is where i need help. what do I use for glue? would locktite work? or do i have an even bigger problem?
:eek2:

[chucked]

are you trying to say that the only glue you have is loctite?

[trailgoon]

If the grip is slipping on the throttle tube all you need to do is re fasten the grip to the tube. There are many ways of doing this. The first thing you need to do no matter which way you decide to fasten it is make sure the throttle tube and the grip are REALLY CLEAN!
You could by the special grip glue and glue it on to the throttle tube.
A lot of people do it the cheap way and just spray the inside of the grip with spray paint. To make sure it won't come off you could put about 3 wraps of safety wire around it.

[Scott-300ex]

HAIRSPRAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!

i use some honda grip glue from the stealership....

[blaster_rider68]

i use haispray and it works fine:D