parking brake block off. question...

[2001400exrider]

when i take that parking brake thing off the capiler where i put the PB block off peaice on, will brake fluid come pouring out? or is it seeled ???

[theTman]

nothing will come out

[lonestar13r]

There's going to be a little pin that sticks out , it has to do with the piston inside the brake caliper , when the parking brake is on ,its supposed to push that pin in , pushing the piston , locking the breaks, its sealed ..that pin,, is sealed , no fluids or anything like that , just for reinsurance , i put some silcone on my block off plate to keep moisture out, my freind has a 250r and dosn't even run a block off. Good luck man'

[jak1389]

nothing should come out. if so theres somthing wrong.

[2000400EX]

I was wondering the same thing as I pulled my e-brake off the other night and there was a little bit of brake fluid that came out. My guess is that the little o-ring that seals the little pin on the back side of the piston is bad.....yes/no?:confused:

[JOEX]

Originally posted by 2000400EX
I was wondering the same thing as I pulled my e-brake off the other night and there was a little bit of brake fluid that came out. My guess is that the little o-ring that seals the little pin on the back side of the piston is bad.....yes/no?:confused:
Probably, add a caliper rebuild kit to your order from C&D Racing;) :D

[2001400exrider]

:huh hopefully i dotn have to...

[greg_gorrell]

thats nice....i thought that was supposed to be like that. I have been using silicon to try and get it to seal but when i use my brake the silicon doesnt hold and brake fluid come shooting out. I prolly should rebuild mine then.

[JOEX]

Originally posted by 2001400exrider
:huh hopefully i dotn have to...
They're only a few dollars, maybe few more up there though:ermm: