PDA

View Full Version : What Sprocket Size??



jt29
04-27-2005, 09:23 PM
If I change my front sprocket from the stock 15T to a 14T and leave a 38T in the rear what will happen. Will I have more low end power of high end??

400EX QUADER
04-27-2005, 09:54 PM
more Lowend and less top.

6858-400ex
04-27-2005, 10:01 PM
what size tires do u have if u have 22 in tires and put a 14 on u will be about stock gearing

04-27-2005, 11:14 PM
If you want your bike to get it on like a Four Stroke Warrior then drop the front tooth to 14 and leave the bike on 20" tires. All this mod will do is make you rev each gear out quicker and get you where you want to be faster. Not to mention you will then get a taste of what the SoCal Four Stroke Warriors do on a daily basis. Do it man its the best mod you can do to a stock bike.

jt29
04-28-2005, 09:51 AM
Originally posted by gotcam?
If you want your bike to get it on like a Four Stroke Warrior then drop the front tooth to 14 and leave the bike on 20" tires. All this mod will do is make you rev each gear out quicker and get you where you want to be faster. Not to mention you will then get a taste of what the SoCal Four Stroke Warriors do on a daily basis. Do it man its the best mod you can do to a stock bike.

So leave the 20" tires go to a 14T in the front and leave 38T in the rear and that will give me more low end right??

thomps6s
04-28-2005, 09:58 AM
I just did that befor i went to the St. Anthony dunes. What a difference. It has more low end. It is the cheapest most effective mod you can do in my opinion.

04-28-2005, 10:17 AM
Exactly if you want your bike to get it on drop a tooth in the front leave the rear alone and enjoy the new and improved Four Stroke Warrior Machine!!!!!

ballisticpb
04-28-2005, 11:58 AM
this site might be usefull to understand the change your gearing in the bike.

http://home.earthlink.net/~gellett/400ex.htm