PDA

View Full Version : 400ex measurements



toyota200x
04-25-2005, 02:40 PM
Hey I am doing a project at college and I need some measurement on a 400ex. I was wondering what the length of the swingarm is, how long the rear shock is, and the diameter of the bearing carrer is. These measurements don't have to be right on. Thank you

toyota200x
04-25-2005, 05:51 PM
Please can someone help me here. I just need some rough lengths.

cals400ex
04-25-2005, 11:53 PM
check this out, thanks to honda's website:




Engine Type 397cc RFVC air-cooled dry-sump single-cylinder four-stroke

Bore and Stroke 85.0mm x 70.0mm

Carburetion 38mm piston-valve with accelerator pump

Ignition Solid-state CD with electronic advance

Starter Electric


DRIVE TRAIN


Clutch Manual

Transmission Five-speed

Driveline O-ring-sealed chain


CHASSIS / SUSPENSION / BRAKES


Front Suspension Independent double-wishbone with Showa shocks, five-position spring-preload adjustability; 8.2-inch travel

Rear Suspension Pro-Link fully adjustable single Showa shock; 9.1-inch travel

Front Brakes Dual hydraulic 174mm discs

Rear Brake Single 220mm disc

Front Tires 22 x 7-10 knobby radial

Rear Tires 20 x 10-9 knobby radial


DIMENSIONS


Length 72.2 inches

Width 45.3 inches

Height 43.7 inches

Wheelbase 48.4 inches

Seat Height 31.9 inches

Ground Clearance 4.3 inches

Turning Radius 10.5 feet

Dry Weight 375.0 pounds

Fuel Capacity 2.6 gallons, including 0.4-gallon reserve


OTHER


Available Colors Red, Yellow

Model ID TRX400EX


FACTORY WARRANTY INFORMATION


6 months Coverage of defects in materials and workmanship

toyota200x
04-26-2005, 07:51 AM
Hey thank you.