View Full Version : WORCS Payette Starting line hill picture
Idaho_Outlaw
04-20-2005, 10:15 PM
.
Here is a picture of a couple bikes jumping . In the background is the starting hill in Payette Idaho . the gate is about right under # 757's tire and goes up and then theres a left hand sweep and back down again .
.http://claypeakmx.com/Andy_Jefferson_s.jpg .
. And the starting line .
.http://claypeakmx.com/starting_line_s.jpg
daddio
04-21-2005, 12:25 PM
so what's just after the top of the hill? do you go back down, (massive jump) turn, or just keep going strait?
Duncanracer
04-21-2005, 01:42 PM
Originally posted by daddio
so what's just after the top of the hill? do you go back down, (massive jump) turn, or just keep going strait?
last year u did a little s turn onto some pavement....
Idaho_Outlaw
04-21-2005, 02:42 PM
Theres a big sweeping left hand turn 180 degree then back down the hill into the 2 berms in the picture right behind the suzuki's rear tire .
The down hill is soft sand and get's some incredible braking bumps . SO the early classes will be able to rail pretty hard as the day go on the brakers will get pretty big
daddio
04-21-2005, 02:47 PM
ok, I see it now. good thing the mini's and blasters go first.
Idaho_Outlaw
04-21-2005, 05:59 PM
Theres a turn out at the bottom of the hill that the Bike minis used so they did have to try the hill .
I would just assume Sean will use it for the Mini quads also . It is located at the top of the first burm in that picture . so the minis run both burms and so on
QuadJunkies
04-22-2005, 10:42 PM
for some reason I dont see any pics?? :confused: Just a red X
I got a fw pics from today ,they turned out better than last years!:o
Idaho_Outlaw
04-23-2005, 09:57 PM
Pics are working again . I moved them from Erics Site to Mine .
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.