key switch???

[330R PowerValve]

I took the key switch off my bike and took those wires, red and black and connected, so the fan runs and the other two wires, black/white and green can be wired into a cr kill button??????? Or even a prodesign?

[nat3060]

yes, when you install a kill switch without the key..

the red and black wire are put together, than the green wire is connected to one wire on the kill switch, than the black/white wire is connected to the remaining kill switch wire

[2MuchChi450R]

ok, you do mean the red wire coming from a different switch and not the brown one correct? I just want to clarify before I go cutting more into my harness :(

[2MuchChi450R]

bump

[honduh440]

http://www.trx450r.org/forum/index.php?showtopic=1735

that explains it real well

[2MuchChi450R]

OK, maybe I'm an oddball, but I'm not getting this. I trace my wires down from the switch itself and I have 2 black wires, one with white, a green wire and a brown wire. Anyone else have this problem? I know there's a red wire in there, but it's hooked up to another connector. Now here's the question I want to make clear, I know I splice together the other wires, but when it comes to the red wire, do I splice on into the other connector and onto the red wire on the different connector, or am I the oddball and splice the brown wire I have with the kill switch?

[honduh440]

you got 4 wires comming from the key switch go down about 8 inches cut them all get rid of the key. take the solid black wire and twist it up with the red wire.

now you have two wires comming from the killswitch hook one side up to the green and one up to the black wire with the white line