PDA

View Full Version : Boring the cylinder question


Ralph
04-14-2005, 02:00 PM
Im about to send out my cylinder to be bored for a 87mm 416 piston and im wodering what the stock bore is because the guy who is doing is is charging 50$ for anything over 1mm of bore. and i dont know how much money to give him.

thx,
Ralph
Doibugu2
04-14-2005, 02:16 PM
Stock I'm pretty sure is a 85mm piston. If that's what you mean.
400exredrider
04-14-2005, 02:18 PM
50 bucks is a fair price for a bore
cals400ex
04-14-2005, 11:13 PM
yeah, stock is 85mm.

i paid over $80 for going 1mm at our dealerships. C&D will probably do it for $50 or $60 if i had to guess
Ralph
04-15-2005, 08:28 AM
Originally posted by cals400ex
yeah, stock is 85mm.

i paid over $80 for going 1mm at our dealerships. C&D will probably do it for $50 or $60 if i had to guess

i would sent it to c&d with the rest of my stuff if i knew the local place i had in mind shut down. This place i sent it to know is in the UPS 1 day ground zone so it shouldnt take too long.