Part # needed for a K&N ASAP!

[QuadJunkies]

We just got some some stuff for our Sons Eton this week,including a new 20 MM Carb. We got a K&N but it dont fit (part # RU-0200) I believe its a Carb that was from Hetricks . Apparelty we didint have enough info from off the Carb to accuately order a replacment and I am despreatly looking for the K&N to have in time for the wk end so he has time to break it in before WORCS race next week. Ill include some pics of the Carb and filter we have along with the filter that DOESNT fit. IF anyone can give us the info we need to order it would be much appreciated. ;)

[QuadJunkies]

sorry for the blur.

[QuadJunkies]

Our uni on the right fit great, one that doesnt fit on the left, it ironically fit our Kaseas 28MM Carb so it will still come in handy :)

[QuadJunkies]

another pic of the Carb

[QuadJunkies]

heres the differences in fit.

[QuadJunkies]

....

[QuadJunkies]

darn camera:mad:

[QuadJunkies]

.....

[QuadJunkies]

Come on Guys, I KNOW some of you have this Carb :( I just need the Part #. Thanks :)

[i-zapp]

i have the exact filter on my son's 20mm keihen. i'd have to check the number at home, but if you have the inside dim, just look it up here- (i think its a ru-2570)

http://www.knfilters.com/search/univround.aspx

and order it direct from k&n

http://shop.knfilters.com/KNShop/Department.aspx?cat=Universal+Air+Filters

make sure to buy a pre-filter, or a z-shield

[QuadJunkies]

thanks for your relpy!
Theres so many to chose from! :eek2:
Hetricks dont run K&N, they run Uni, but one of the guys suggested these #'s ???

RU-20
3 round"4 in. long

RU-36
3.5
5 inch long(little longer than I wanted )

unless theres more than one kind of 20MM I guess we should be using 3x4 in 1 3/4

Does that sound right for this ??? I wish I had a better way to see the filters!

[QuadJunkies]

I tried to search by Part # for the numbers I listed above and it says does not exsist.?? :confused:

[i-zapp]

i checked, i'm running a 62-1470

http://shop.knfilters.com/KNShop/Product.aspx?pid=62-1470

fits nice.

[QuadJunkies]

Originally posted by i-zapp
i checked, i'm running a 62-1470

http://shop.knfilters.com/KNShop/Product.aspx?pid=62-1470

fits nice. thank you so VERY much!Ill order tomorrow! :) Do you have any pics of it on by any chance?

[QuadJunkies]

well,those measurements are not the same?:confused: thats not going to fit..

[Spike99]

.

Trying viewing the many measurements within:

http://www.knfilters.com/search/univround.aspx


Once you obtain the Part number, you can then contact your favorite K&N Filter re-seller with that part number.

Hope this helps....

.

[QuadJunkies]

Originally posted by Spike99
.

Trying viewing the many measurements within:

http://www.knfilters.com/search/univround.aspx


Once you obtain the Part number, you can then contact your favorite K&N Filter re-seller with that part number.

Hope this helps....

. thats the problem, Im trying to FIND the part number I need :(

[Spike99]

.

Sorry. Misunderstood your question.

I reviewed the many Air Filter pictures you posted. Since rubber clamp-on openings are very hard to measure (because they could be stretched or shrunk due to the clamp), perhaps a different approach might work.

If possible, can you measure the opening of the carb for us?? When measuring, start measuring at the 1" to higher numbers. If other words, overlap your tape on one side of the carb intake by 1". That steel clip on the edge of the tape measure sometimes wears and doesn't give accurate readings.

I've read on the K&N site that their rubber can be stretched up to 1/16 (1.5mm). For this info, surf: http://www.knfilters.com/universal/universal.htm

If you have an "inbetween size" of intake, you may have to order a little smaller, then "make it stretch". If you can, please show up pictures of the carb opening with 1" overlap on your tape measure.

thanks.

.