Good Handel bars

[Joe400ex]

were can i find good handle bars i was looking and hoping if somone can send me a link i was looking for somthing thats like a high bar link please

thanks:)

[waxer]

I'm looking for the same thing myself. I bent the right side of my handlebars this past weekend. Hit a rut that I didn't see and my body weight was forced onto the bars due to the impact. So now the right side sits about an inch or two lower than the left.

Stock bars aren't that strong IMO.

[TC426EX]

The CR-Hi bend bars are very popular out there. They are much wider and less swept back than the stockers, increasing your control on the quad, esp. through the rough stuff... Renthal 7/8" bars are what Ive always used and have yet to bend a pair ever in my life... If you really like the stock bend but want more strength, just grab a set of Renthal 400ex bend bars. They are exactly the same as stock except with a crossbar and 10x the strength...

Everyone carries them, so I would try C+D or Rocky Mountain ATV first....

I you have money to spen buy a new clamp and install some pro tapers. If you dont want to spend too much buy a pair of tags or rentals. I think there both around $60-80.

[2000400EX]

Is there a handlebar out there that is similar to the stock bend, but has more rise to it? I like my stock setup, but would like it to be taller and stronger.

Fly Racing makes a good bend for the 400 and they sit an inch or two higher than stock I think they go for like $50-70. Another positve to them is they are about one inch smaller than the renthal's on each side. I used them for over two years and loved them.

[Joe400ex]

2000400ex can u give me a link cuz thats somthing i want somthing the same width just little higher and no so leened toward me ya know

[jak1389]

i have the tag t-2 fat bars cr-low bend and love them!!! they are i think much nicer than renthals.

[400EX QUADER]

I love my FLY'S!:D

[400exrider707]

Originally posted by Joe400ex
2000400ex can u give me a link cuz thats somthing i want somthing the same width just little higher and no so leened toward me ya know

Thats exactly what I bought. Get renthal 7/8th 250R bends. They are a little taller. Nacs racing sells them occasionally for $50. Check there often.

[Joe400ex]

if u guys have any pics may u please post them

thanks:)

[muddy400EX]

ive got cheapy MSR's that were like 25 bucks but they work! and they are comfortable. Tag,Renthal,Pro Taper,Fly are pretty much all good bars. personally i like the dirtbike bends cuz i like em low and wide, it gives me more control of the quad:macho

[Joe400ex]

do the renthal 7/8' sit higher than stock. and are they they same width

Yes about 1"

[Joe400ex]

in dennis kirk its 85 anyone no were it can be cheaper. plus any pics of the renthal 7/8's thanks guys