Question about emergency block off plates

[platinum350]

I just ordered a emergency block off plate and was curious what if you replace the whole perch w/ an aftermarket one to get rid off the giant one already on there? Thats the only advantage I could see w/ even removing the emergencey barke system. Anyway, if I were to replace the perch w/ an aftermarket one, what would I do for a dust boot?
thanks!

[wheeltrax]

you wouldnt have a dust boot, because the only thing you would have is your clutch perch.

[platinum350]

I would expect you would want something to keep dirt/dust from getting into you clutch cable. I am picturing you would want it to look something like a clutch from a dirtbike. IMO

[bigvforcer]

leave your stock boot on your cable. it may be a little big but it will still work!

[platinum350]

gotcha...

[wheeltrax]

you could do that too, either way it works. i just left the cover off.

[Sportrax10]

I havnt had any problems not having a dust boot. If your really worried, im sure you can order one off a dirtbike from servicehonda.com...

Good luck...

[Woodsrider]

Just get a CR clutch perch, lever, and dust boot. Whole set up will cost less than $25.

[platinum350]

great idea!

[PunkA$$]

Originally posted by Woodsrider
Just get a CR clutch perch, lever, and dust boot. Whole set up will cost less than $25.


If I were to order that, what exactly would I order? (80, 125, 250, what year etc..) Or are they all the same?

[Woodsrider]

125 and 250 are both the same part numbers. Just ask for a a CR style lever and perch, with a dust boot. You can get the part numbers here (http://www.servicehonda.com/hard%20parts/hard_parts.htm)
Or you could just call C&D and order it. They'll know what to send.