what size sprocket would be best?

[99'300EX]

i have a 300ex, what size font sprocket would be the best to get more speed? and how many teeth does the stock 1 have??

[kc 300EX]

stock has 13, I would go with a 14 to get moe top end speed, but be warned, u will lose bottom end........I know some more people on this site have done this, hopefully theyll give u there input

14 is all a 300 will take,and you will have to ditch the case saver....you can also drop a few teeth in the rear and get results,about three teeth in the back is equal to one up front.later:devil

[#77]

I have a 36 on the rear (-2) and a 14 up front. I have a modded motor, but I don't know about yours. Mine pulls it very well, but I have no experience with a 14 on a stocker. About the case saver, you can modify it for the extra clearance needed. I am going to do this myself tomorrow.

[99'300EX]

i have fmf megamax II, jet kit, air filter, 22in holeshots, modded air box, choke plate removed...and some other simple things. how much more top end does it give u??

[trx400ex]

it doesnt give you any top end or bottom end, it doesnt touch you power curve, it just makes it easier to pull which give it more power though the whole range, unless you meant speed, but in that case i wouldnt worry about losin speed, it wont have too much effect

[rhino99]

It will give you a few MPH on the top end speed