help with my 350x motor

[darrell43031]

ATTN anybody with a ATC 350X shop manual!! I need help quick. What i need is a printable copy of the trouble shooting section. Specificly how to test the pulse generator, and if it has it how to trouble shoot the cdi box. i know you CAN'T test the cdi, but in the Atc 200X manual it shows how to trouble shoot it. any kinda print out could help alot!! I appreciate any help at all!!

Darrell

[2muchquad]

i dont know the specifics but i think the pulse generator should be between 200 to 350ohms.i have a 350x motor iCANT get spark to.i have 2cdi boxes,2 flywheels,2 have a hard time believing a 400ex having drastic gains with a port job. i am not saying it won't help coils,but no spark.im gonna try and pick up another stator even though mine was within spec.i have double checked every connection,ground etc.thats the thing with electrical,just because its "in spec"doesnt mean its good..try 3wheelerworld.com for a electrical schematic,thats where i got mine.good luck to ya

[darrell43031]

BUMP

[jaywoodsrider]

The pulse generator should measure between 297 and 363 ohms.

[sportraxkid]

I dont think they ever made a manual for a 350x. Except a shop manual that only dealers had

[jaywoodsrider]

I have a manual, tells you everything you need to know, but i don't have a scanner and it's in a diagram. If i have time sometime i'll try to exlplain it.

[darrell43031]

Thanks that would help alot

[Glenn]

Try heading over to www.3wheeler.org

Be careful though, you may catch flack for using a a trike engine in a quad. ;)