PDA

View Full Version : 300ex motor?



QuAdEr 317
04-10-2005, 07:26 PM
i kno theres 330 kits and all for a 300ex but whats there for a 250x lik a 280 kit or something? lemme kno who does them n what its calld

04-10-2005, 07:34 PM
i think thers a 350 kit

300ex73
04-10-2005, 08:22 PM
Well, it all depends on how much money you wanna spend. You can use the crank and cylinder jug from a 300. That right there bumps up the displacement about 40cc. I've seen a few 300's bored up to a 395, give or take a cc or 2. You can use a stroker crank, and get it up to like the 420's or 430's. It'll be hell to kick over, but it's some massive power in such a small quad. I have an older Dirt Wheels laying around. They talked about Jeremy Schell's old 400X. So there's quite a few cc's to be had. Like I said, it just depends on how much you wanna spend. Just check around with some companies.

Birddogg
04-10-2005, 09:28 PM
The jug off a 300 won't be any help. The 250x and 300ex share the same bore.

300ex73
04-11-2005, 07:57 AM
They share the same bore, but they have a different stroke. I'm not sure that it having a shorter stroke also means a shorter length cylinder, but it's possible. The only way to tell would be to measure them

bradley300
04-11-2005, 08:44 AM
you just need a 300ex crank and rod;) that makes a 250x 282 cc, or the same size as a stock 300ex

any big bore kit that fits a 300ex will also fit a 250x, it will just be 20cc smaller. so a 350 kit (300ex) is a 330 kit in a 250x

QuAdEr 317
04-11-2005, 01:48 PM
Originally posted by bradley300
you just need a 300ex crank and rod;) that makes a 250x 282 cc, or the same size as a stock 300ex

any big bore kit that fits a 300ex will also fit a 250x, it will just be 20cc smaller. so a 350 kit (300ex) is a 330 kit in a 250x

thanks a lot bradley thats what i was lookn for so if i boughta 350 kit for my 250x my 250 would be a 330 and if i bought 330 kit my 250 would be a 310 correct?

bradley300
04-11-2005, 10:15 PM
Originally posted by QuAdEr 317
thanks a lot bradley thats what i was lookn for so if i boughta 350 kit for my 250x my 250 would be a 330 and if i bought 330 kit my 250 would be a 310 correct?

correct! you will need to specify that it is for a 250x tho, but you need the 300ex 350cc bore size. the reason for this is the wrist pin is in a different spot on the 250x;)