parting out National MX 300ex, best of everything

[roostin_dale]

Thats right its time to go. Please do not post any stupid offers or I will not bother to reply, prices are pretty firm. also PLEASE DO NOT POST IF YOU ARE NOT INTERESTED! If you have any other type of questions please use PM's.

UPDATED LIST!!!

300ex Engine..brand new with only 4 races on it. Bored .80 over (298cc), oversized valves w/ titanium retainers, Sparks MX cam, heavy clutch springs, new stator, Shaved head, Port and Polished intake and exhaust, great youth production or sport class motor...$600 plus shipping..strong motor!

300ex FourStrokeTech unlimited CDI Box..$55 shipped

IMS footpegs, used 4 races...$150 plus shipping

ONe brand new battery and one used..offer

Mikuni Flatslide 38mm Carb..$85 shipped

3 Uni Air Filters..$25 plus shipping for all (2 of them used only once) Also have one K&N with prefilter

Airbox, no lid..$20 plus shipping

Laeger stock length stem, grinded down under bar mounts so clarke tank will fit, starting to rust in that spot, strong stem, $60 plus shipping

Calipers, $25 each

rear Caliper..$35 shipped

Front Hubs with rotors, $65 + shipping

rear Hubs $45 plus shipping

Spindles $40 plus shipping

AC grab bar $20 plus shipping

BRAND NEW, alluminum 38th rear sprocket..$30 shipped

BRAND NEW, 13th front..$15 shipped

Stock headpipe with shield..$20 shipped

two DG swinger skids..$40 shipped on each

Front brake ressie and lever, custom cover that says "too damn fast" $40 shipped (two)

Rear Brake ressie $35 shipped

Pivot bolt, nut, and brake lever...$40 shipped(have two of these setups)

Stock rear shock..$55 shipped

Stock Carb with airboot $55 shipped

Stock clutch perch and lever...$25 shipped

Stock brake lines..$25 shipped

EZ pull perch and lever...$35 shipped

Maybe more...ask if you see somehting not listed







SOLD:
A-arms
Swingarm
Elkas
TCS Fronts
Axle
Carrier
Nerf Bars
Frame
Bumper
SS Brake Lines
rear wave rotor
250x rev box
SParks exhaust
Works Ultracross
renthal bars
Seat
Stock gastank
hipers and tires
Clarke Tank

also, EVERYTHING in the picture is forsale...only post if your a serious buyer! let me know what you want, everything will go on ebay in a couple weeks if not sold!!

http://www.imagestation.com/picture/sraid162/p37c7717bd174b011596ec6b2d17920d6/f4ab6309.jpg http://www.imagestation.com/picture/sraid162/p0493046c85f518c33a7258cdb7a6cb01/f4ab62fd.jpg http://www.imagestation.com/picture/sraid162/pfcecb371e4d17c25074de5be467aa9e4/f4ab62f5.jpg

will u do second day for that axle and anitfade....175 ill pay....

if u dont have a anti fade ill give ya 140 sencond day for that axlee

[roostin_dale]

Im not sure how much for second day but it might be a few days before i get around to taking it apart..axle isnt in great shape but its strong! just needs polished up..

what about that anti fade

[roostin_dale]

Originally posted by exracer64
what about that anti fade

talk to you on AIM

[drifterx]

I call dibs on the Sparks x-5, if thats ok. I'll talk to parents, and get back to you very soon...

[roostin_dale]

I am not taking "dibs" on anything, first to pay me gets the parts...sorry, need the money badly...

[drifterx]

Ya, i figured you'd say that. It was worth a shot though. My dad is just being a stick in the mud about it, so no go. But, if he changes his mind, i'll shout at ya later.

[02_300ex]

do u have the stock shocks?

[hardkoratvmxr]

how much for the nerfs i need asap

[skatrdude20]

How much for the frame and bumper?

[hardkoratvmxr]

how much for just the tires. i mean the complete set i also need asap. or how much for rears and how much for fronts

[77rigid]

How much for the entire quad like it sets?I would be more interested in it all together.

sorry but its the axle is gone and anti-fade

roostin ill get the money out tommorow

[QuAdEr 317]

is that a stock 300ex clutch n perch?

[Cody_300ex]

Derek I want that Axle! Talk to you on AIM.

its sold...i already said it....ill be sending the money tommorow...sorry everyone

[rollie]

roostin,im interested in that rear shock....talk to me on AIM LiveRideDie51

[roostin_dale]

sorry cody the axle sold early today...Antifade brakehub/locknut is sold also...

02_300ex ..sorry no stock shocks, I have TCS fronts, and Elka fronts...also have Elka rear/stock rear, and a works rear..

hardkoratvmxr..PM sent'

skatrdude20..I listed the price of the frame, bumper will be $35 shipped...

77rigid ...parting quad out, not selling...

QuAdEr 317..yes but i think i might have an EZpull also..ill check if your interested

nacsracer12 ...ill talk to you on AIM

[02_300ex]

how much for the tcs?

[roostin_dale]

The TCS shocks are custom built by TCS..The are 14.75 inches eye to eye so you can use them on 400ex a-arms and stock upper mounts...vlaved for 400ex +2 arms...

[Cody_300ex]

Derek I might be interested in the seat cover or if you want to sell the seat together w/e.

[roostin_dale]

Originally posted by Lil_300Ex_Kid
Derek I might be interested in the seat cover or if you want to sell the seat together w/e.

seat might be sold..ill let you know

[QuAdEr 317]

ok im interestd if it is a stock clutch and perch so let me know....also how much for those tcs again if i dont have to rebuuld my motor ill prolly buy them but i have to see

[roostin_dale]

TCS shocks are sold...

QuAdEr 317 ..I have a stock clutch lever and perch, also have an EZ pull..

[Chino886]

How much for just the beadlocks?

[roostin_dale]

Originally posted by Chino886
How much for just the beadlocks?

They might be sold, i will let you know if he doesnt take them..

[Chino886]

I am definitely interested if the price is right.

[ky300ex]

Is the steering stem for sale? If so, is it the stock stem or an aftermarket stem?

[Cody_300ex]

Do you still have that RED chain off that 300ex you bought? If not do you have a chain in good cond.? Also did you have a aftermarket CDI on your 300ex motor, i'd be interested in that also!

[roostin_dale]

ky300ex ..I sold both my stock ones. I have a Laeger standard length. It has some rust under the bar mounts where i had to grind it so I could fit the oversized clarke tank...


Lil_300Ex_Kid..yea i have that red chain..$40 shipped.

how much for the stem.....any pics of rust spots???money has been sent for lsr axle,anti fade,and sparks cam

[koh0001]

do you still have the front end? 3+ arms,tie rods, shocks?

[roostin_dale]

yes the front end is still for sale...

[Sully300EX]

Do you still have the Axle?
Very interested!!!:D

[roostin_dale]

axle is sold..

TCS fronts are sold, brakuhub is sold, clarke tank may be sold,

I tihnk those are the only things for sure but i am getting alot of interest...

Hipers not for sale anymore..

[250xridamatt]

Is your season done in that class? When are you old enough to race a 450?

[roostin_dale]

yes im done, turn 16 in june and need to build a 450.

everybody make reaosnable offers!! MUST SELL eveyrthing asap!

[250xridamatt]

OK, i figured as much, Where are you from? Sorry im kinda stealin your thread, but i didnt think it was worth a pm, but im done now.

[roostin_dale]

Originally posted by 250xridamatt
OK, i figured as much, Where are you from? Sorry im kinda stealin your thread, but i didnt think it was worth a pm, but im done now.

Located in Central Illinois

[rap169]

how much for the plastics?
very interested

[roostin_dale]

you have a PM

[koh0001]

pm you about the front end.

[roostin_dale]

eveyrone that has asked me somehting should have been answered by AIM, PM, or on this post. Let me know if you need anything else..

[roostin_dale]

These items are sold:

Burgard +3 arms
Elka Fronts
Burgard +2 Swingarm
Elka rear shock
Sparks Pipe
DG bumper
rear Wave Rotor
Seat and Cover
braided Brake lines front and back

[77rigid]

I need a gas tank.Give me a price shipped to Mt.Vernon,IL 62864.Thanks

[roostin_dale]

Gas tank and frame are sold...

[hardkoratvmxr]

hey i will buy the nerfs pm me or talk to me on aim

[watts16]

how much for the works rear shock?..

is it set up for stock swinger


thanks

[roostin_dale]

works is setup for 175lbs on stock siwnger. Only 1 ride on it since rebuilt including new hose...$200 shipped..
Its just been sitting in my trailer as an extra..

[hazrdus]

how much for the plastics?

[roostin_dale]

Originally posted by hazrdus
how much for the plastics?

They are melted where pipe is and pretty scratched from one season of racing..$200 plus shipping..

FIRST POST UPDATED

[ethanp87]

hey roostin_dale im interested in the works rear ultracross you have any pics.

[roostin_dale]

Originally posted by ethanp87
hey roostin_dale im interested in the works rear ultracross you have any pics.

No, but I will get one posted within an hour, so keep checking back...

[roostin_dale]

here is a quick pic i just ran out and took of the Ultracross

http://www.imagestation.com/picture/sraid164/p33204887b8e624eb660c16cf2f229606/f4799011.jpg

[roostin_dale]

bump..TCS fronts still forsale, guy didnt buy them.

Everything is starting to go on ebay in a few days if it isnt sold..

[ethanp87]

what is the lenght off the works rear from eye to eye?

[roostin_dale]

Originally posted by ethanp87
what is the lenght off the works rear from eye to eye?

about 14.5 from center eye to center eye....

[frosti108]

hows the carb? is it gummed up at all? condition? pics?

thanks

[hondardr4life]

Originally posted by frosti108
hows the carb? is it gummed up at all? condition? pics?

thanks


DANG, I had my eye on that, lol.

[roostin_dale]

there are alot of people interested in the carb.

It is not gummed up, i took it off and cleaned it regularly. Its in good condition but the air adjstment screw is a little bent....I will get you pics.

I alos have about $40 worth of main and pilot jets I will sell for $25, brand new..

[frosti108]

is the air adjustment screw easily replaced?

how about the carb and jets for $110 shipped?

what do you think?

i tried to send you a PM but your box is full.

thanks,

ed

[roostin_dale]

Originally posted by frosti108
is the air adjustment screw easily replaced?

how about the carb and jets for $110 shipped?

what do you think?

i tried to send you a PM but your box is full.

thanks,

ed

sorry, i cleaned my PM box. I will take $110 shipped on all of it. Yea all you need is a new screw for like 5 bux maybe?..im not sure. But it still functioncs and works and everything.. its just bent, ive ran it like this since ive had the carb..

[ltl666devil]

do you still have the steering stem and skid plates? how much? any pics

[roostin_dale]

Originally posted by ltl666devil
do you still have the steering stem and skid plates? how much? any pics

I have the laeger stem..thats has been described in the first post.

I have the swinger skids for $40 shipped on each...looks like every other swingarm skid out there...

[ltl666devil]

do you have a pic of the steering stem

[roostin_dale]

Originally posted by ltl666devil
do you have a pic of the steering stem

Ill have one up within a half hour...

[roostin_dale]

here you can see it was grinded to fit the clarke oversize tank..

http://www.imagestation.com/picture/sraid165/p8b2cd47c4da8f16f207086a4a70baab0/f46f5e8a.jpg http://www.imagestation.com/picture/sraid165/pf7c1b4961dcc75b7d473f7227853ffc8/f46f5e85.jpg

man i would buy that if it was a +1....ltl666devil this is 1 hell of a deal....i think u should do it

[ltl666devil]

its it chrome or polished. i cant tell in the picture and do you take paypal

[roostin_dale]

my paypal is currently down. It is nickle plated...

[ltl666devil]

let me kno when its back up. how much shipped to 07470

[roostin_dale]

Originally posted by ltl666devil
let me kno when its back up. ill take it

can you pay with a money order?

[ltl666devil]

id rather use paypal

[roostin_dale]

Stem is sold, sorry but i said numerous time that the first to send money gets it.

[77rigid]

Your updated list says there is a stock gas tank.If this is still for sale I will take it.I am also interested in the rear caliper. Let me know.Thanks.

[roostin_dale]

yes i still have the tank. I have one rear caliper left in great condition with a Cascade Block off....

[77rigid]

Please give me a price shipped for both.Thanks.

[YZ400EX]

I am VERY interested in the plastics..Do you still have them?? Have any closer pics of them?? How bad are they melted?? let me know asap..message me on AIM!! f4kmamola

[hondardr4life]

Do you have a steering stem bearing, I blew mine out.

[roostin_dale]

77rigid ..PMd you

YZ400EX..they are gone, sorry..


hondardr4life..there is one on the bike now, but i am not taking the rest of the bike apart till sunday...so if you still need one then let me know..it was brand new at the start of the season so it should be good!

[77rigid]

back at ya!

[Moser87m]

do you still have the

IMS PEGS
MOTOR
PLASTICS

?

[roostin_dale]

Originally posted by Moser87m
do you still have the

IMS PEGS
MOTOR
PLASTICS

?

plastics are gone. Motor is up in the air, may be sold. Yes i still have the pegs.

[hondardr4life]

Yea, I will still want it. I only have 1 honda store around where I live and they are way overpriced. How much do you want for the bearing?

[ESrider]

Do you still have the Hipers? If so, how much for the front two?