Laeger YZ 426

[fast440]

It is a Laeger YZ frame one of the last ones made. (not a 250r Laeger modified frame). All chrome +4 protrax front end ,chrome cr500link swingarm , fliptop subframe . All 3 custom Axis fully adjustable shocks compression / rebound . 2001 TC yz426 motor ( Jason Luburgs national motor) all freshened up.TC full pipe, everything is engraved with seriel numbers from TC to prove it. all Hinson set up Hinson inner and outer clutch hubs and Hinson clutch basket. New Yamaha plates and fibers also, Billet aluminum SFB clutch cover and stator cover. Motor has about 4 hours of ride time. Also motor has an auto decompression cam (starts right up) Other things include dominator axel , billet baldwin front hubs ,Lonestar rear hubs, tag bars , work connection clutch lever, 7 way steering stabilizer ,Oversized aluminum radiator , All douglas shamrock beadlocks with MXR4's, ect........... The list goes on Just freshened up at the end of year with fresh powdercoat and chrome . Looks great . need nothing , Dont need to sell it, i have been riding my YFZ450 ( i am 32 yrs old and dont have the time for both bikes anymore) (The Laeger quad is sooo much better ) This is my baby and hate to sell it

[fast440]

some more

[fast440]

more

[QuAdRaCeR244]

Where are you located and how much are you looking to get out of it?

[fast440]

I live in Maryland $10,000 obo

[fast440]

One more

[gagne736]

thats a real nice quad free bump

[infantry317]

That is a beauty!

[festa171]

This quad is AMAZING! :eek2:

I am astonished you would take a yfz between the two. I didn't realize Laeger made +4 arms, do you know offhand the width of this?

You should PM '416exmx' I seen he has been looking for a top quality mx hybrid. I couldn't imagine a nicer one.

Good luck on selling this - Free bump!

[laeger_crf450]

is this a 2002 frame or a 2001, and the way you can tell is the 2001 has an indent in the frame on the gear shift lever side which means that the motor sits higher in the frame.

[Gabriel Racing]

so what is the lowest you will go?

9000-9500?

[fast440]

Its a 2001 frame I have the VIN# plate ,Hey Gabriel Racing email me at fasttonyp@aol.com if you are serious Thanks Tony

[fast440]

The indent on the frame is for the motor mount bolt and it is on the clutch side.Thanks Tony

[Gabriel Racing]

i was saying because im trying to sell my Walsh 250r.


but i also might race it this year so im not sure right now.

[fast440]

Laeger

[lilchampro1]

you have a pm :rolleyes: lemme kno whats goin on

[jst]

How did you aquire the motor or did you buy the entire quad?

[fast440]

I bought it from someone who bought the whole quad. Thanks Tony

[TampaBoy813]

Nice bike...might have to part it out to make real money off it....good luck!
free bump!

[LDRacing124]

I was wondering if you still had this quad or not. I am interested in buying a 450. THanks.

[fast440]

Yes i still have the quad. Are you interested? email me at fasttonyp@aol.com Thanks

[fast440]

ttt

[diangelo#67]

hey tony I'm still waiting for this dude to give me the money for my quad and I'M still interested
http://www.imagestation.com/picture/sraid169/pda332bacd64166f3bdd858413f952ebc/f4146a12.jpg

[quadpornstar]

I have a bike very simalar bike and I am wondering what kind of airbox you are using. My bike was built to use the 250r plastic airbox but it is in very bad shape and stock 250r airboxs are hard to come by. Any info would be helpfull

[fast440]

Sounds good keep me updated and let me know whats going on. Thanks Tony:)

[fast440]

It is a 250r aluminum airbox with a suzuki LT500 carb boot fits great .Hope that helps . Let me know if i can answer any other ???? Thanks Tony

[quadpornstar]

Hey Tony, I sent you a PM, If you get a minute take a look at your quad and get back to me. Thanks

[blue416ex]

willing to part out? sorry if this was stated already but im interested in motor,carb,electronics,kicker assembly, oil system,cooling system, and possibly frame and such PM me if interested in selling parts looking for anything your willing to sell seperate off the whole bike:D

[fast440]

Not looking to part out , but thanks for asking. Sounds like you need alot motor,frame ect... I could make you really nice deal on the whole thing>>>>>> Its ready to ride (no assembly required) :) Let me know Thanks Tony

[CTmxyfz]

Pm'd you

[fast440]

I tried to pm you back but it says your box is full. Thanks Tony email me fasttonyp@aol.com

[CTmxyfz]

Hey man, im emptying it right after i type this post here! Hit me up in the PM or at MxYFZ on AIM. MY email is DOWN! sorry:(

[fast440]

email me fasttonyp@aol.com Thanks

[Robin Hood]

Wow thats a sharp bike! WIsh I had the money for it. :(

Is that an iridescent/pearlish frame finish? Looks great.

[CTmxyfz]

my email does not work. you need to PM me!