cutting fenders

[ES400ex]

whats the best way to cut back your front fenders?

[44oEX]

use a non permarnante marker and make a line where you want to cut it. make sure you like it. then take a grinder and cut. make sure to make it a little bigger to fix any mess you might make with the grinder. then the second time around cut it to final size.

[redrider4ex]

Dont use a grinder, try to get ahold of a dremel tool, or some type of handheld rotary saw, much more reliable cut

[mx400]

I used a knife, sand paper, and a good steady hand.

[300ex73]

I just used a dry erase marker and a jigsaw.

[awsomeaussies]

or a hacksaw

[Nick110]

i used a hacksaw then dry sanded, then wet sanded, and i took a torch to it to get the gloss fisnish back

Tin snips worked fine for me.

[Warnerade]

Originally posted by Yoshi18
Tin snips worked fine for me.

[Quiksilver01]

i put tape down in the design i wanted. then cut it with a regular hand saw and filed the ruf spots then sanded the whole thing

[NacsMXer]

I used a Rotozip and electrical tape for my front and rear fenders. 16,000 rpm's and very controllable :o

[wboy62417]

i used a grinder for mine

[RRP]

electric tape,sawsall,sandpaper,torch

[bud660r]

I USED TAPE AND A RAZOR BLADE WORKED REALLY GOOD FOR