PDA

View Full Version : Handlebars



redexrider4290
04-05-2005, 06:38 PM
i want to get some handle bars
mostly because i think new bars look cool i want some that have the foam pad with the cross'bar

how much does a pair of handlebars cost not expensive ones some that are just cheap but not like cheap so that they bend eaiser than stock

hardkoratvmxr
04-05-2005, 06:40 PM
get renthals they are about 60 bucks and have the crossbar pad

wheeltrax
04-05-2005, 06:45 PM
if you want cheap (under 40) you can get almost any steel bar, and you can get aluminum bars from Fly, Moose, and a few others. If you want to spend more than 40 but under 80, you can get renthals, fmf, msr, and others. for over 80 you can get tag t2 or any other oversized bars. stock is 7/8. hope this helps a bit..

duke416ex
04-05-2005, 07:15 PM
Tusk aluminum bars from rocky mountain are about the cheapest, they also have cheap steel bars too I think. You can get tags for around 60-65 I think.

redexrider4290
04-06-2005, 06:47 PM
alright thanks i was hoping that bars wore more like 15-20 bucks because thats wat my freinds told me they were and one of my freinds bought some for 20

well i guess those were from one of my other freinds and they were dirtbike bars but they were pretty nice
he neded em he had a 300ex and stock with all the plastic on the bars him and me agreed it didn't look so good

redexrider4290
04-11-2005, 10:59 AM
i found some handlebars and the highest they ocme in is 6inc wich i would get because mine are 5and a 1/2 but then when i was looking at my quad i noticed that i dont think a 6inch bar w/ a croosbar and pad wouldn;t fit with the stock plastic thing that holds on the reverse and nuetral lights and the key i'm not worried about the ignition but i am about the lights has anyone put any aftermarket bars on their 250ex and had these problems

duke416ex
04-11-2005, 11:03 AM
You can drill holes and put your lights in your plastic.

redexrider4290
04-14-2005, 11:47 AM
do you think that zip tying them to the bars would work

ACHI
04-14-2005, 12:11 PM
I have a question, if i get a trail tech bar clamp and tag double high bars am i gonna have any probs with cables (ie clutch and brake) not being long enough. Essentially if i buy this setup do i need to buy anything else other than grips to make it work on my 04 400ex.