Can u remove melted rubber from pipe?

[exrider416]

On my banshee's toomey pipe there is rubber on it where a boot leaned up against it and melted on it. Is there a way you can remove this without messing up the finish on the pipe?

[oldsandman]

try some oven cleaner. Get the pipe warm and carefully spray some oven cleaner on it . Cover all painted surfaces that could be hit with overspray. Wait a few mins. and it will wipe off.

[44oEX]

warm up the motor. let the pipe get hot. maybe ride around for a couple minute. then that something like a clean rag and just whip it off. don't burn your self know. but it works really good.

[JForestZ34]

My dad does this on his harley when my mom's boot hits the pipes. Let the motor run to get the pipe nice and hot, then put alittle car wax on a rag and then wipe where the rubber is should take it right off. Just wipe it quick so it comes off with no problems.


James

[LeGaCyGiAnT124]

grind it out :) haha but get it hot with a blowdryer and then rub it with a rag:ermm:

[Got nads?]

steel wool works for me

[44oEX]

steel wool works good, but not on chrome pipe.

[Trevor]

The steel wool worked for me aswell!