timing marks

[Westro]

Which timing marks should I be using? I know about the cam (loobs and markings), but what about the flywheel markings.

Thanks very much... the rebuild is just about done....

[400exrider707]

Put the flywheel on the "T" mark. You'll then see the marks on the cam sprocket. (Provided you have the valve cover off) Two of them will lign up with the head and the third will be straight up and down.

[Westro]

Thanks....

[Westro]

I assume that this is with the cam lobes down?

I am having trouble getting it running after the new rebuild. It spits once and awhile, but only at a nearly full throttle. I was wondering if I had the cam off.. but I pulled the cover and it is right on with the timing as long as the cam lobes should be down. If not I am 180 out...