what lugnuts are you guys with hipers using?

[turboTony]

My buddy just picked up a set of hipers and when using the stock lugnuts, can't get a socket on them cause the hole is to small.
Is there a smaller set of lugnuts he should be using and where can we get them ?

[dirtriderex]

I just turn the stock lugnuts around and screw it in with a 3/8" ratchet

[turboTony]

he turned them around but couldn't get a socket in there. :ermm:
I haven't been over there yet to check them out.

[dirtriderex]

what? You can get a socket in. I do it all the time

[redriderex]

i went over and fixed his problem,he is all set

[bradley300]

you can use the stock nuts for a blaster, they are only 14 mm instead of 17 and they have a washer on them also

[turboTony]

Originally posted by redriderex
i went over and fixed his problem,he is all set

Now what about the exaust situation? Are we riding on Sunday? I'm going to throw my machine back together Saturday.

[Out_Sider]

Originally posted by bradley300
you can use the stock nuts for a blaster, they are only 14 mm instead of 17 and they have a washer on them also

these are the ones i use for all my aftermarket wheels

[CdaleXtreme]

The lug nuts off of a 2004 Suzuki Twin Peaks.

Perfect 17 MM flange nut for all non-tapered Lug Nut applications.

[brandonpeake]

i use cannondale lugnuts that i got from
jeff, The Quad Shop

[jeepnrocks]

I have a friend that just used the stock lugs and put a washer behind them. never had any problems.
on my t-9s i just turned the lug upside down. no problems that way either

[atvrider12764]

im just using the stock lugnuts on mine without a washer, why arnt you suppose to use the stock ones?