How do i remove the stock carrier?

[scrapen]

Help please

[dunebuggie66]

1.take your right wheel/hub off.
2.remove your brake caliper
3loosen your axle lock nut by turning it toward the carrier
4.remove the clip that is on the axle that the lock nut tightens up against,
5.with a spanner wrench remove the clip that holds the caliper hub on.
6.remove the caliper hub by tapping it lightly from the inside with a hammer
7.pull the axle out
8.loosen the bolts on the back of your swingarm all the way (the ones you loosen to adjust your chain)
9. pull the carrier out

[scrapen]

thank you! :)