View Full Version : white plastic??
-=Skot=-
05-11-2002, 01:05 AM
any one know how to get filthy,dirty stained white plastic to look white again?
-=Skot=-
05-11-2002, 01:05 AM
would engine degreaser hurt it?
Sparkles
05-11-2002, 05:15 AM
try some w d40
barbwire44
05-11-2002, 05:33 AM
My buddy used 800 grit paper then 1000 then 1200 finished wet sanding with 1500 and then buffed her out with zymoil wax looked good but i wouldn't do it, to much elbow grease and time.
S.O.S pads work awesome on white plastic.
kabd69667
05-11-2002, 08:34 AM
I don't know this is just somthign that came to my messed up mind, but what about bleech?
RIZZO
05-11-2002, 09:20 AM
that's what i was thinking........bleech..........but not sure.
did anyone ever try this on white plastic ?????
Bleech will work , a few of my friends did it on their old yamaha dirtbikes.
Regulator 250X
05-11-2002, 11:42 AM
Go to lrdperformance.com and check out their racing tips, it has a great tip on how to clean plastic, especially white. Check it out, it also has some other cool tips.
i used comet on my bike. worked alright
For my white plastic I clean it with a rough material sponge with OXY clean mixed in with the water.
DESDAK4
05-13-2002, 12:16 PM
I use 2001 wheel cleaner with a rough cloth on my wifes trailblazer. That stuff seems too work good. Then I shine them up with Son of a Gun
RdingManiac420
05-13-2002, 02:46 PM
If I where you I wouldnt rub it with anything abrasive. I sanded my 250 and blasters white plastics then everytime it got dirty the dirt got stuck down in the little scratches. I would just try to polish it with some type of chemical. I personaly like mop 'n' glo. You can find it at your supermarket in the floor cleaning isle.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.