nacs4030
03-27-2005, 12:04 PM
I have pretty close to a race ready 350ex that i want to trade for a raptor in any condition as long as the frame isn't bent or cracked. Doesn't have to have the motor if the chassis parts are in good shape.
It is a 93 honda 300ex frame (not bent or cracked anywhere, looks almost brand new.) that has been converted to accept a honda 350x three wheeler engine. I used the powroll conversoin kit. All the wiring is off the stock 350x. Nothing has been cut or spliced just the headlight taken off. The only thing it doesn't have yet is the exhaust but i'm working on making one out of a 400ex exhaust.
1.It has ASR +2 a arms and tierods, (the a arms use heim joints which means no torn boots or greasing.)
2. Durablue axle which can be adjusted 0,+2,+4
3. 2001 swingarm with brand new bearings never been rode on
4. DG nerfs
5. Realtor and turf tamer rear tires (both sets)
6. Mudscreen front bumper
7. k and n air filter
8. maier race cut front plastic which is brand new, not even scratched. Back plastic has normal wear.
9.DG rear grab bar
10. motor has just been rebuilt on the first overbore with a wiseco high compression piston, also has brand new bottom end (new crank, rod and all bearings. Basically brand new engine except for the gears.
11. aluminum handlebars, not sure what kind
12. no rust on the quad anywhere.
Really the only thing it would need is a some shocks and it would be race ready.
It is a 93 honda 300ex frame (not bent or cracked anywhere, looks almost brand new.) that has been converted to accept a honda 350x three wheeler engine. I used the powroll conversoin kit. All the wiring is off the stock 350x. Nothing has been cut or spliced just the headlight taken off. The only thing it doesn't have yet is the exhaust but i'm working on making one out of a 400ex exhaust.
1.It has ASR +2 a arms and tierods, (the a arms use heim joints which means no torn boots or greasing.)
2. Durablue axle which can be adjusted 0,+2,+4
3. 2001 swingarm with brand new bearings never been rode on
4. DG nerfs
5. Realtor and turf tamer rear tires (both sets)
6. Mudscreen front bumper
7. k and n air filter
8. maier race cut front plastic which is brand new, not even scratched. Back plastic has normal wear.
9.DG rear grab bar
10. motor has just been rebuilt on the first overbore with a wiseco high compression piston, also has brand new bottom end (new crank, rod and all bearings. Basically brand new engine except for the gears.
11. aluminum handlebars, not sure what kind
12. no rust on the quad anywhere.
Really the only thing it would need is a some shocks and it would be race ready.