PDA

View Full Version : Mods On Ur Quad



Kyle_Racer_31
03-26-2005, 06:41 PM
List All The Mod s On Ur 250, 300, ETC

Mine Are----265ex

-Powroll 20cc Big Bore Kit
-Red Hmf Full System
-Maxxis I Razrs
-Had Barnett Clutches....Has EBC Now
-All Balls Front Whell Bearings
-Dg Nerfs With Red Netting
-Dg Fat Series Grab Bar.
-Armdillo XC Front Bumper
-Planet Honda Front Fenders.
-Some Kind Of Cheap Brakes Front And Back
-Tusk 400ex Billet Gas Cap

Coming Soon Is -K&N Power Kit.
-Fly Or Moose Bars
Then Iam Done With the 250

roostin_dale
03-26-2005, 06:54 PM
Mods on my 300ex...here we go

-Burgard +3+1 A-arms
-Burgard +2 Swingarm
-Elka Rear Shock
-Elka fronts with piggybacks
-Lonestar +4 axle
-Lonestar Bearing Carrier
-Lonestar Locknut
-Laeger Steering Stem
-Fullbore Fenders
-Ceet Seat Cover
-Renthal Handlebars
-Roll Design Footpegs
-AC nerf bars and grab bar
-Hiper Carbon Wheels
-Razr MX Tires
-DG Bumper
-Clarke gas Tank
-Galfer Wave Rotors
-Galfer Brake Lines
-Gussetted Frame
-Uni Filter
-Lectron Carburator
-Xtreme Chain Guide
-Sunstar Sprockets
-Regina Chain
-Four Stroke tech CDI Box
-Curtis Sparks Exhaust
-LOTS of motor mods, i do not like to tell them since i race though...

Quiksilver01
03-26-2005, 07:09 PM
mods on my 250ex. dg nerfs, tag handlebars, cut plastic, relocated ignition r/n lights and choke, durablue axle(coming soon),bunch of painted stuff, foot peg extenders, headlight cover,and thats about it. not very much but lots more coming soon. hey kyle-racer-31 how well does the poweroll kit work is it hard to install, is it worth the cash?

Kyle_Racer_31
03-26-2005, 07:37 PM
The Kit is Way Worth the Money....I Did Install it One Of My Buddys Dad Did...It took him like 1-2 days to install everything....If You Get You Will Love it...

yellow400ex05
03-26-2005, 07:49 PM
I know speed isn't everything but how much speed gain did you get like I no a 250ex stock will go 51 MPH and how much HP do u think you have gained? now when you say how fast your 250ex goes don't exagerrate it too much just take an acurrate guess.

Quiksilver01
03-26-2005, 07:54 PM
thanks for the info im gonna get it as soon as i fix my axle and get a white bros exhaust.:D

Kyle_Racer_31
03-26-2005, 08:00 PM
Originally posted by Yellow250ex04
I know speed isn't everything but how much speed gain did you get like I no a 250ex stock will go 51 MPH and how much HP do u think you have gained? now when you say how fast your 250ex goes don't exagerrate it too much just take an acurrate guess.

It Will go about 56-57 The Hp I dont know...But Went Coming around turns it push more and when i climb hills It Hauls ***** Up them

yellow400ex05
03-26-2005, 08:09 PM
Damn, that sounds awsome I bet it really woke ur 250 up!:eek2:

If you get it going 60 you can pretty much keep up with almost all of the quads out there. How do u do when ur riding with the bigger quads do you ever actually pass them, if so thats f*kin awsome! have you topped it out pinned yet or often?

Kyle_Racer_31
03-26-2005, 08:21 PM
Originally posted by Yellow250ex04
Damn, that sounds awsome I bet it really woke ur 250 up!:eek2:

If you get it going 60 you can pretty much keep up with almost all of the quads out there. How do u do when ur riding with the bigger quads do you ever actually pass them, if so thats f*kin awsome! have you topped it out pinned yet or often?

Yeah I Pin it All the time.....Every one I ride With Has 400s or 300 s that are bored...But in the Woods iam always in front of them...But Thats the rider not the machine

bulkdriverlp
03-26-2005, 08:28 PM
:blah:

oriclez
03-26-2005, 11:16 PM
Never saw a 250ex with one of those kits. Would like to see one run sometime but anyways I have:

300ex:
Profab 406 kit
Powroll Crank/Rod
11:1 Piston
Supertrapp E.A.R Exhaust
400ex Carb
Profab Hardned Rockers
Powroll Valve Springs
K&N Filter
Head work
2+ A-Arms
4+ Durablue Axle
250R shocks
MSR Handle Bars
Fly Clutch Lever
Mairer Front Racing Plastics
Mairer Rear Racing Plastics
DG Grab Bar
DG Bumper
14T Front Sprocket 36T Rear Sprocket

stonerider250x
03-27-2005, 07:55 AM
Originally posted by Kyle_Racer_31
List All The Mod s On Ur 250, 300, ETC

Mine Are----265ex

-Powroll 20cc Big Bore Kit
-Red Hmf Full System
-Maxxis I Razrs
-Had Barnett Clutches....Has EBC Now
-All Balls Front Whell Bearings
-Dg Nerfs With Red Netting
-Dg Fat Series Grab Bar.
-Armdillo XC Front Bumper
-Planet Honda Front Fenders.
-Some Kind Of Cheap Brakes Front And Back
-Tusk 400ex Billet Gas Cap

Coming Soon Is -K&N Power Kit.
-Fly Or Moose Bars
Then Iam Done With the 250


one question though how did a 20cc bore kit put it at 265 when it is only 229cc's stock? it should actually be a 249 now

03-27-2005, 08:44 AM
mods on mine when im done wiht it:


ac nerfs
ac bumper
ac grab bar
ac full engine skid
burgard +2+1 a arms
works shocks with remote rezzies
raptor shock in the rear
durabend +2+4 axle
white brothers cam
header(not sure what kind yet)
custom shorty(not sure what kind yet)
tag t2's
ouary grips
tusk mounting kit
maier 250r hood
uni filter
400ex carb
outerwears airbox lid
hellbound p-brake block off plate
hellbound backgrounds
razr mx tires
douglas rims
e-line gas cap breather
galfer +2 steel braided brake lines
srp ez pull clutch lever
shockwears shock covers

and more

Quiksilver01
03-27-2005, 12:41 PM
[QUOTE]Originally posted by stonerider250x
one question though how did a 20cc bore kit put it at 265 when it is only 229cc's stock? it should actually be a 249 now [/QUOTE thats what i was wanderin:confused:

watts16
03-27-2005, 02:09 PM
1998 honda 300ex
pro circuit T-4 exaust
maier plastic
durablue axle
handguards
holeshots XCT
front work shocks w/rezzies

xrxmxcx
03-27-2005, 03:23 PM
i figured i'd come in and stink this EX post up, even though its geared towards all quads, its all ex's so far


heres the mods on my warrior

candy blue frame, swingarm, and front hubs
front hipers w/ holeshot xcr 21x7x10 (on order)
rear hipers with intergrated hubs with 20x11x8 xcr's
wicked products+3+1 camber caster adj. arms
lonestar racing chrome antivibe stem
works triple rate shocks with resevoirs
steel braided lines
moose racing bars low bend
acerbis rally pro handgaurds
pro grips
nacs blockoff
dg front bumper
dg fat series grab bar
dg alloy series nerfs
dg alloy series brake caliper gaurd
rear dg baja swingarm skid
maier plastics belly skid
titax sprockets geared 13/40
front white custom maier yfz plastics
front white scooped racing hood
rear white maier plastics
full dg system
k&n filter
custom airbox lid
re-jetted
engine going in for rebuild, planning on barnett clutch, and a .20 over piston

Kyle_Racer_31
03-27-2005, 05:16 PM
Originally posted by xrxmxcx
i figured i'd come in and stink this EX post up, even though its geared towards all quads, its all ex's so far


heres the mods on my warrior

candy blue frame, swingarm, and front hubs
front hipers w/ holeshot xcr 21x7x10 (on order)
rear hipers with intergrated hubs with 20x11x8 xcr's
wicked products+3+1 camber caster adj. arms
lonestar racing chrome antivibe stem
works triple rate shocks with resevoirs
steel braided lines
moose racing bars low bend
acerbis rally pro handgaurds
pro grips
nacs blockoff
dg front bumper
dg fat series grab bar
dg alloy series nerfs
dg alloy series brake caliper gaurd
rear dg baja swingarm skid
maier plastics belly skid
titax sprockets geared 13/40
front white custom maier yfz plastics
front white scooped racing hood
rear white maier plastics
full dg system
k&n filter
custom airbox lid
re-jetted
engine going in for rebuild, planning on barnett clutch, and a .20 over piston

Do You Have Any Pics????????

300exOH
03-27-2005, 05:41 PM
My mods:
burgard +2+1 a arms
custom length Elka front shocks
shock mount relocator
rear works shock with elka SSD conversion
reverse mod
reverse foot shifter
UNI filter
airbox mod
135 main, 42 pilot jets
sparks X4
MSR aluminum bars
driving lights
AC mudscreen
AC 6 pack rack
kenda knarly's -rear
carlisle badlands -front(holeshot copy)
P-brake blockoff(LSR)
durablue +4 axle
durablue locknut
fullbore front fenders
Oury grips
stainless front brake lines
DG nerfs
custom ignition and reverse/neutral light holder
custom 300ex honda wing graphics

Soon to come:
RTC clutch lever
black seat cover
swingarm skid

Here's a pic before the graphics

honda_racer_713
03-27-2005, 05:52 PM
heres my mods

trans blue frame
black swinger
black lower arms
trans blue upper
silver fullbore plastic
FMF shorty exhaust
AC nerfs
AC front bumper
Elka shocks w/remote rezzies
01 Raptor rear shock
asr a-arms
kenda klaw front tires
klaw rears
douglas beadlocks
.180 rims in front
Tag handlebars
RTC clutch assembly
RTC brake lever
UNI air filter
modded airbox
rejetted carb
Sidewinder sprockets and chain
14t front
36t back
powermadd handguards
durabreak axle
LSR bearing carrier
K&K parking brake block off
modded CDI box

probably more that im forgetting

xrxmxcx
03-27-2005, 05:54 PM
kyleracer--

yeah, currently im in the stage of rebuilding , i have a post n the other atv section where i put up pics, i put them in the wrong thread but there up atleast, there under the topic, just a few pics of my little rebuild or something like that

heres one for now

bradley300
03-27-2005, 07:31 PM
here's the mods on my 2003 blaster
Laegers +3 LT a-arms
Elka LT tripple rate comp adj. front shocks (16 inches)
holeshot tires
douglas wheels
burgaurd +2 swingarm
elka dual rate dual adjust rear shock
IMS 4 gallon gas tank
quadshop graphics
snyder motorsports AIRSOL cylinder (head mods and porting)
Snyder motorsports 4mm stroker crank
v-force reeds
LRD RFX exhaust
tag bars
streamline brake lines
PRM skids, grab bar and bumper

Out_Sider
03-27-2005, 09:01 PM
ASR +2+1 arms
ASR SS lines
Moose Racing EZ adjust clutch lever
Works Performance Shocks
Sunstar Sprockets
ProTaper bars
Durablue +2+2 axle
Champion Beadlocks
Itp mxs/ tamers
Maier plastic
AC Racing bumper, nerfs
lots more that i dont feel like listing

dirtmomma
03-29-2005, 11:54 AM
Oh dear there's some nice quadcycles on here ;)

Well I don't have much but here's what i got:

Custom made +3 a arms & tie rods
PRM front bumper
PRM skid plate
Wiseco high comp piston
bored .060 over (i think hehe);)
400ex carb
hardened rockers
WEB cam stage 3 (have a stage 4 to put i n)
porting work
nerfs
custom pipe guard
kick up pegs
FLY bars(whoopwhoop :))
tether kill switch
Hoosier's up front
Camac nc80's up front on offset rims
Duro flattrack tires on rear
Turf tamers on race ring wheels on rear
FMF Megamax full system
K&N filter
LSR parking brake block off

dirtmomma
03-29-2005, 12:03 PM
Here's our blasters "stuff" :)

bored .060 over
Wiseco high comp piston(P-6)
34mm Mikuni flat slide carb (300 main)
ported till she can't be ported no more :D
Wiseco Hot Rod Crank
Head decked
Tusk clutch(best one we've found)
FMF SST full system
Hoosier's up front
ITP Holeshots up front(wore out)
ITP Holeshot XC 20x11x8 on Douglas rears
Turf saver rears grooved for flattrack
custom lowering kits front & rear
DG? grab bar

SOON to come
240 Big Bore kit

This quad doesn't look like much but once you see it on the track you'd be amazed!

priebo15
03-29-2005, 06:54 PM
mine are in my sig.. i dont plan to get anymore, besides maybe the jet kit that im hoping to get soon, and a cheap exhaust. cuz im tradin in for a 400ex around july

MX174
03-30-2005, 07:48 AM
Originally posted by Kyle_Racer_31
Yeah I Pin it All the time.....Every one I ride With Has 400s or 300 s that are bored...But in the Woods iam always in front of them...But Thats the rider not the machine

Im callin BS on u kyle :D You never was in front of me on the 440 ;)

PowerMadd789XC
03-30-2005, 06:11 PM
2000 Yamaha blaster

Kenda klaw XC's all around
PowerMadd racing hand guards
Renthal handlebars
UNI air filter

Kyle_Racer_31
03-30-2005, 06:17 PM
Originally posted by MX174
Im callin BS on u kyle :D You never was in front of me on the 440 ;)

Thats When It was Stock But...That 440 was Bad

PowerMadd789XC
03-30-2005, 06:21 PM
2000 Yamaha blaster #789 XC
Set up for XC
Kenda klaw XC's all around
PowerMadd racing hand guards
Renthal handlebars
UNI air filter
DG bumper
DG grab bar
DG nerfs
DG National Silencer
Pro-Circuit Platnium Fatty
Magnum Clutch and Perch system
Pro design racing kill switch
Shock covers
Oil injection block off kit
Pro grip grips
Number plate Backgrounds
Bored.10
Wiseco piston
Raptor 660 blue Frame
Maier number plate
D.I.D Chain
Sunstar Sprocket
Moose racing Gaskit kit
Runin KLOTZ race lubricants
Soon to come ,
Graphics
Rims
Rear racng brake kit :D

Birddogg
04-02-2005, 02:19 PM
Here's the rundown of my 250X
400ex A-arms, Works shocks
400ex swingarm & shock
250r twin row carrier
250r axle & hubs
400ex spindles
AC skids & bumpers
Supertrapp headpipe
Won't bore you with the little stuff

MX174
04-02-2005, 09:50 PM
woah post a pic of that 400ex swinger on the 250x, ive never heard of anyone doin that

dirtmomma
04-03-2005, 09:11 AM
Originally posted by MX174
woah post a pic of that 400ex swinger on the 250x, ive never heard of anyone doin that

I was thinkin the same thing :) post a pic if ya can

Kyle_Racer_31
04-03-2005, 10:24 AM
Originally posted by MX174
woah post a pic of that 400ex swinger on the 250x, ive never heard of anyone doin that

416exmx
04-03-2005, 10:46 AM
Originally posted by MX174
woah post a pic of that 400ex swinger on the 250x, ive never heard of anyone doin that


here's a 300 I have for sale with 250r a-arms 400ex shocks and 250r whole rear end (swinger shock axle brakes ect...)

Birddogg
04-03-2005, 10:55 AM
Here you go.

Birddogg
04-03-2005, 11:03 AM
Heres a little bigger pic, still working on my picture posting perfection.

MX174
04-03-2005, 12:46 PM
what all did you guys have to do to make them fit? seems like that the 400 would be alot wider and it had the cut out spot for the motor also

Birddogg
04-03-2005, 02:32 PM
Have to make a spacer to fill in the gap between the pivot bearings. You have to weld a mount for the linkage to the frame too. I had to do some cutting/welding to make the 400 shock fit.

ryanh250ex
04-04-2005, 01:59 PM
mods are in sig.